SN65LVP19

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground (see Figure 1).
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A-7
(4) Tested in accordance with JEDEC Standard 22, Test Method C101

SN65LVx18 is high frequency oscillator gain stages supporting both LVPECL or LVDS on the high gain outputs in 3.3-V or 2.5-V systems. Additionally, provides the option of both single-ended input (PECL levels on the SN65LVx18) and fully differential inputs on the SN65LVx19.

The SN65LVx18 provides the user a Gain Control (GC) for controlling the Q output from 300 mV to 860 mV either by leaving it open (NC), grounded, or tied to V_CC. (When left open, the Q output defaults to 575 mV.) The Q on the SN65LVx19 defaults to 575 mV as well.

SN65LVx18 provide a voltage reference (V_BB) of typically 1.35 V below V_CC for use in receiving single-ended PECL input signals. When not used, V_BB should be unconnected or open.

SN65LVx18 is characterized for operation from 40°C to 85°C.