SN74ALS232B

· Independent Asynchronous Inputs and Outputs
· 16 Words by 4 Bits
· Data Rates up to 40 MHz
· Fall-Through Time 14 ns Typical
· 3-State Outputs
· Package Options Include Plastic Small-Outline Package (DW), Plastic Chip Carriers (FN), and Standard Plastic 300-mil DIPs (N)

Supply voltage range, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
Input voltage range, V_I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 0.5 V to 7 V
Voltage range applied to a disabled 3-state output . . . . . . . . . . . . . .. . . . . 0.5 V to 5.5 V
Package thermal impedance, _JA (see Note 2): DW package . . . . . . . . . . . . . . . . 105°C/W
                                                                          FN package . . . . . . . . . . . . . . . . . . 83°C/W
                                                                          N package . . . . . . . . . . . . . . . . . . . 78°C/W
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C

† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. This is a stress  rating only, and functional operation of the device at these or any other conditions beyond those indicated in the "recommended operating conditions" section of this specification is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to GND.
2. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length of zero.

This SN74ALS232B 64-bit memory features high speed and fast fall-through times. It is organized as 16 words by 4 bits.

A first-in, first-out (FIFO) memory is a storage device that allows data to be written into and read from its array at independent data rates. This SN74ALS232B FIFO is designed to process data at rates up to 40 MHz in a bit-parallel format, word by word.

Data of SN74ALS232B is written into memory on a low-to-high transition at the load-clock (LDCK) input and is read out on a low-to-high transition at the unload-clock (UNCK) input. The memory is full when the number of words clocked in exceeds by 16 the number of words clocked out. When the memory is full, LDCK signals have no effect on the data residing in memory. When the memory is empty, UNCK signals have no effect.

Status of the SN74ALS232B FIFO memory is monitored by the FULL and EMPTY output flags. The FULL output is low when the memory is full and high when it is not full. The EMPTY output is low when the memory is empty and high when it is not empty.

A low level on the reset (RST) input resets the internal stack-control pointers and also sets EMPTY low and sets FULL high. The Q outputs are not reset to any specific logic level. The first low-to-high transition on LDCK, after either a RST pulse or from an empty condition, causes EMPTY to go high and the data to appear on the Q outputs. It is important to note that the first word does not have to be unloaded. Data outputs are noninverting with respect to the data inputs and are at high impedance when the output-enable (OE) input is low. OE does not affect the FULL or EMPTY output flags. Cascading is easily accomplished in the word-width direction but is not possible in the word-depth direction.The SN74ALS232B is characterized for operation from 0°C to 70°C.