SN74ALS841

Features:

• 3-State Buffer-Type Outputs Drive Bus Lines Directly
• Bus-Structured Pinout • Provide Extra Bus-Driving Latches Necessary for Wider Address/Data Paths or Buses With Parity
• Buffered Control Inputs to Reduce dc Loading Effects
• Power-Up High-Impedance State
• Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (NT) 300-mil DIPs


Specifications

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Operating free-air temperature range, TA: SN74ALS841, SN74ALS842 . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.


Description

These SN74ALS841, SN74AS841A, and SN74ALS842  10-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. SN74ALS841, SN74AS841A, and SN74ALS842  are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The ten latches are transparent D-type latches. TheSN74ALS841, SN74AS841A, and SN74ALS842  have noninverting data (D) inputs. The SN74ALS842 has inverting D inputs.A buffered output-enable (OE) input places the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.OE does not affect the internal operation of the latches. Previously stored data can be retained or new data can
be entered while the outputs are off.
The SN74ALS841, SN74AS841A, and SN74ALS842 are characterized for operation from 0°C to 70°C.