SN74LV8151DWE4

Maximum Operating Temperature : + 85 C
Mounting Style : SMD/SMT
Supply Voltage - Min : 2 V
Supply Voltage - Max : 5.5 V
Number of Output Lines : 3
Polarity : Inverting, Non-Inverting
Packaging : Tube
Number of Input Lines : 10
Package / Case : SOIC-24


Description

The SN74LV8151DWE4 is one member of the SN74LV8151 series.The SN74LV8151 is a 10-bit universal Schmitt-trigger buffer with 3-state outputs, designed for 2-V to 5.5-V VCC operation. The logic control (T/C) pin allows the user to configure Y1 to Y8 as noninverting or inverting outputs.When T/C is high, the Y outputs are noninverted (true logic ), and when T/C is low, the Y outputs are inverted(complementary logic).

Features of the SN74LV8151DWE4 are:(1)2-V to 5.5-V Vcc operation; (2)max tpd of 15 ns at 5 V; (3)schmitt-trigger inputs allow for slow input rise/fall time; (4)polarity control for Y outputs selects true or complementary logic; (5)typical VOLP (output ground bounce) <0.8 V at VCC = 3.3 V, TA = 25°C; (6)typical VOHV (output VOH undershoot) >2.3 V at VCC = 3.3 V, TA = 25°C; (7)Ioff supports partial-power-down mode operation; (8)supports mixed-mode voltage operation on all ports; (9)latch-up performance exceeds 250 mA per JESD 17.

The absolute maximum ratings of the SN74LV8151DWE4 can be summarized as:(1)supply voltage range:-0.5 to 4.6V;(2)input voltage range:-0.5 to 7.0V;(3)output voltage range:-0.5 V to VCC+ 0.5 V;(4)input clamp current:-20mA;(5)voltage range applied to any output in the high-impedance or power-off state:0.5 V to 7 V; (6)storage temperature range:-65 to 150.Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

Parameters:

Technical/Catalog Information	SN74LV8151DWE4
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Logic Type	Schmitt Trigger - Buffer, Driver
Package / Case	24-SOIC (7.5mm Width)
Packaging	Tube
Mounting Type	Surface Mount
Number of Bits per Element	8
Number of Elements	1 - Single
Operating Temperature	-40°C ~ 85°C
Voltage - Supply	2 V ~ 5.5 V
Current - Output High, Low	12mA, 12mA
Drawing Number	296; 4040000-5; DW; 24
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	SN74LV8151DWE4 SN74LV8151DWE4