SN74LVC1G386

Features:

` Available in the Texas Instruments NanoStar ™ and NanoFree™ Packages
` Supports 5-V V_CC Operation
` Inputs Accept Voltages to 5.5 V
` I_off Supports Partial-Power-Down Mode Operation
` Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
` ESD Protection Exceeds JESD 22
    2000-V Human-Body Model (A114-A)
    200-V Machine Model (A115-A)
    1000-V Charged-Device Model (C101)


Pinout




Specifications

			MIN.	MAX.	Unit
VCC	supply voltage		-0.5	6.5	V
VI	input voltage range(2)		-0.5	6.5	V
VO	Voltage range applied to any output in the high-impedance or power-off state(2)		-0.5	6.5	V
VO	Voltage range applied to any output in the high or low state(2) (3)		0.5	VCC + 0.5	V
IIK	input diode current	VI < 0		-50	mA
IOK	output diode current	VO > VCC or VO < 0		-50	mA
IO	Continuous output current			±50	mA
	Continuous current through VCC or GND			±100	mA
JA	Package thermal impedance(4)	DBV package		165	/W
		DCK package		259
		YEP/YZP package		123
Tstg	Storage temperature range		-65	150

(1) Stresses beyond those listed under "absolute maximum ratings" may
      cause   permanent damage to the device. These are stress ratings only,
      and fnctional operation of the device at these or any other conditions
      beyond  those indicated under "recommended operating conditions" is
     not implied. Exposure to absolute-maximum-rated conditions for
     extended  periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if
      the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.


Description

The SN74LVC1G386 performs the Boolean function Y = ABC in positive logic.

NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

This device SN74LVC1G386 is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.