Features: ` Available in the Texas Instruments NanoStar™ and NanoFree™ Packages` Supports 5-V VCC Operation` Inputs Accept Voltages to 5.5 V` Max tpd of 6.3 ns at 3.3 V` Low Power Consumption, 10-mA Max ICC` ±24-mA Output Drive at 3.3 V` Ioff Supports Partial-Power-Down Mode Operation`...
SN74LVC1G58: Features: ` Available in the Texas Instruments NanoStar™ and NanoFree™ Packages` Supports 5-V VCC Operation` Inputs Accept Voltages to 5.5 V` Max tpd of 6.3 ns at 3.3 V` Low Power Consum...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| MIN | MAX | UNIT | |||
| VCC | Supply voltage range | 0.5 | 6.5 | V | |
| VI | Input voltage range(2) | 0.5 | 6.5 | V | |
| VO | Voltage range applied to any output in the high-impedance or power-off state(2) | 0.5 | 6.5 | V | |
| VO | Voltage range applied to any output in the high or low state(2) (3) | 0.5 | VCC + 0.5 | V | |
| IIK | Input clamp current | VI < 0 | 50 | mA | |
| IOK | Output clamp current | VO < 0 | 50 | mA | |
| IO | Continuous output current | ±50 | mA | ||
| Continuous current through VCC or GND | ±100 | mA | |||
| JA | Package thermal impedance(4) | DBV package | 165 | /W | |
| DCK package | 259 | ||||
| DRL package | 142 | ||||
| YEA/YZA package | 143 | ||||
| YEP/YZP package | 123 | ||||
| Tstg | Storage temperature range | 65 | 150 | ||
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device eliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are bserved.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
This configurable multiple-function gate SN74LVC1G58 is designed for 1.65-V to 5.5-V VCC operation.
The SN74LVC1G58 features configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic functions AND, OR, NAND, NOR, XOR, inverter, and noninverter. All inputs can be connected to VCC or GND.
This SN74LVC1G58 device functions as an independent gate, but because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and negative-going (VT) signals.