SN74LVTH541DWE4

Polarity : Non-Inverting
Maximum Operating Temperature : + 85 C
Mounting Style : SMD/SMT
Number of Input Lines : 8
Number of Output Lines : 3
Supply Voltage - Max : 3.6 V
Packaging : Tube
Supply Voltage - Min : 2.7 V
Package / Case : SOIC-20


Description

The SN74LVTH541DWE4 is one member of the SN74LVTH541 series.These octal buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation,but with the capability to provide a TTL interface to a 5-V system environment.The 'LVTH541 devices are ideal for driving bus lines or buffer-memory address registers. These devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout.

Features of the SN74LVTH541DWE4 are:(1)support mixed-mode signal operation (5-V input and output voltages with 3.3-V VCC); (2)typical VOLP (output ground bounce) <0.8 V at VCC = 3.3 V, TA = 25; (3)support unregulated battery operation down to 2.7 V; (4)Ioff and power-up 3-state support hot insertion; (5)bus hold on data inputs eliminates the need for external pullup/pulldown resistors; (6)latch-up performance exceeds 500 mA per JESD 17.The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2) input is high, all outputs are in the high-impedance state.

The absolute maximum ratings of the SN74LVTH541DWE4 can be summarized as:(1)supply voltage range:-0.5 V to 4.6 V;(2)input voltage range:-0.5 V to 7 V;(3)voltage range applied to any output in the high-impedance or power-off state:-0.5 to 7V;(4)current into any output in the low state:128mA;(6)storage temperature range:-65 to 150.The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

Parameters:

Technical/Catalog Information	SN74LVTH541DWE4
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Logic Type	Line Driver, Non-Inverting
Package / Case	20-SOIC (7.5mm Width)
Packaging	Tube
Mounting Type	Surface Mount
Number of Bits per Element	8
Number of Elements	1 - Single
Operating Temperature	-40°C ~ 85°C
Voltage - Supply	2.7 V ~ 3.6 V
Current - Output High, Low	32mA, 64mA
Drawing Number	296; 4040000-4; DW; 20
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	SN74LVTH541DWE4 SN74LVTH541DWE4