SN75HVD12P

Number of Input Lines :
Number of Output Lines :
Polarity :
Supply Voltage - Max : 3.6 V
Supply Voltage - Min : 3 V
Packaging : Tube
Mounting Style : Through Hole
Maximum Operating Temperature : + 70 C
Package / Case : PDIP-8


Pinout




Description

The SN75HVD12P is designed as one kind of 3.3 V RS-485 transceiver that can be used in (1)digital motor control; (2)utility meters; (3)chassis-to-chassis interconnects; (4)electronic security stations; (5)industrial process control; (6)building automation; (7)point-of-sale (POS) terminals and networks. And this device is monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines.

Features of the SN75HVD12P are:(1)operates with a 3.3-V supply; (2)bus-pin ESD protection exceeds 16 kV HBM; (3)1/8 unit-load option available (up to 256 nodes on the bus); (4)optional driver output transition times for signaling rates of 1 Mbps, 10 Mbps and 25 Mbps; (5)meets or exceeds the requirements of ANSI TIA/EIA-485-A; (6)bus-pin short circuit protection from -7 V to 12 V; (7)low-current standby mode: 1 uA typical; (8)open-circuit, idle-bus, and shorted-bus failsafe receiver; (9)thermal shutdown protection; (10)glitch-free power-up and power-down protection for hot-plugging applications; (11)SN75176 footprint.

The absolute maximum ratings of the SN75HVD12P can be summarized as:(1)Supply voltage range: -0.3 V to 6 V;(2)Voltage range at A or B: -9 V to 14 V;(3)Input voltage range at D, DE, R or RE: -0.5 V to VCC + 0.5 V;(4)Voltage input range, transient pulse, A and B, through 100 : -50 V to 50 V;(5)Continuous total power dissipation: See Dissipation Rating Table;(6)Junction temperature: 170°C;(7)Storage temperature range: -65°C to 150°C;(8)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C.

The electrical characteristics of the SN75HVD12P can be summarized as:(1)Input clamp voltage: -1.5 V;(2)Change in magnitude of differential output voltage: -0.2 to 0.2 V;(3)Peak-to-peak common-mode output voltage: 400 mV;(4)Steady-state common-mode output voltage: 1.4 to 2.5 V;(5)Change in steady-state common-mode output voltage: -0.05 to 0.05 V;(6)Short-circuit output current: -250 to 250 mA;(7)Differential output capacitance: 16 pF. If you want to know more information such as the electrical characteristics about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	SN75HVD12P
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Number of Drivers/Receivers	1/1
Type	Transceiver
Voltage - Supply	3 V ~ 3.6 V
Package / Case	8-DIP (300 mil)
Packaging	Tube
Protocol	RS485
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	SN75HVD12P SN75HVD12P 296 14047 5 ND 296140475ND 296-14047-5