SP209E

As in the original RS-232 multi-channel products, the SP207E Series multichannel RS-232 line transceivers provide a variety of configurations to fit most communication needs, especially those applications where +12V is not available. All models in this Series feature lowpower CMOS construction and SIPEXproprietary on-board charge pump circuitry to generate the +10V RS-232 voltage levels. The ability to use 0.1mF charge pump capacitors saves board space and reduces circuit cost.Different models within the Series provide different driver/receiver combinations to match any application requirement.

The SP211 and SP213E models feature a lowpower shutdown mode, which reduces power supply drain to 1mA. The SP213E includes a Wake-Up function which keeps two receivers active in the shutdown mode, unless disabled by the EN pin.

The family is available in 28pin SO (wide) and SSOP (shrink) small outline packages. Devices can be specified for commercial (0°C to +70°C)and industrial/extended (40°C to +85°C)operating temperatures.

The SP200E Series are enhanced multichannel RS-232 line transceivers with improved electrical performance. The SP200E family is pin-to-pin compatible with our previous SP200 family as well as popular industry standards. As with the orignal SP200 family, all models in this Series feature lowpower CMOS construction and Sipexpatented (5,306,954) on-board charge pump circuitry to generate the ±10V RS-232 voltage levels, using 0.1mF charge pump capacitors to save board space and reduce circuit cost. The SP211E and SP213E models feature a lowpower shutdown mode, which reduces power supply drain to 1mA. Enhancements include lower power supply current at 3mA typical (no load) and superior ESD performance. The ESD tolerance has been improved on this family to over ±15kV for both Human Body Model and IEC1000-4-2 Air Discharge test methods.