Features: ` P1dB=32dBm @ 2140MHz` ACP=-65dBc with 18.4dBm Channel Power @ 2140MHz` Low Thermal Resistance Package` Power Up/Down Control<1s` Robust Class 1C ESDApplication· Macro/Micro-Cell Driver Stage· Pico-Cell Output Stage· GSM, CDMA, TDSCDMA, WCDMA, IS-95· Single and Multi-Carrier Applicat...
SPA-1526Z: Features: ` P1dB=32dBm @ 2140MHz` ACP=-65dBc with 18.4dBm Channel Power @ 2140MHz` Low Thermal Resistance Package` Power Up/Down Control<1s` Robust Class 1C ESDApplication· Macro/Micro-Cell Drive...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Series | SPA |
| Frequency (MHz) | 700 to 2200 |
| Gain (dB) | 13.5 |
| NF (dB) | 5.5 |
| OP1dB (dBm) | 32 |
| OIP3 (dBm) | 49 |
| Vcc (V) | 5 |
| Id (mA) | 645 |
| Package/Size (Dim in mm) | SOF-26 |
| Parameter | Rating | Unit |
| Max Device Current (lCE) *Max Device Voltage (VCC) Power Dissipation |
1500 6.0 6 |
mA V W |
| Max CW Input Power | ||
| 50 output load 10:1VSWR output load |
33 21 |
dBm dBm |
| **Max Modulated (W-CDMA) Input Power |
||
| 50 output load 10:1VSWR output load |
26 18 |
dBm dBm |
| Max RF Output Power with 50 output load (Continuous long term operation) |
30 | dBm |
| Max Junction Temperature (TJ) Operating Temperature Range (TL) Max Storage Temperature |
150 -40 to + 85 150 |
°C °C °C |
| ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level |
Class 1C MSL 1 |
*No RF Drive
**W-CDMA, 64 DPCH, 1 CH Forward
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
IDVD<(TJ-TL)/RTH, J-l and TL=TLEAD
RFMD's SPA-1526Z is a high linearity single-stage class A Heterojunction Bipolar Transistor (HBT) power amplifier. The SPA-1526Z is made with InGaP-on-GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. It is well suited for use as a driver stage in macro/micro-cell infrastructure equipment, or as the final output stage in pico-cell infrastructure equipment. It features an input power detector, on/off power control, ESD protection, excellent overall robustness, and a hand reworkable and thermally enhanced SOF-26 package.