Features: 128 x 128 Dot-matrix 4-gray levels display driver with an icon lineSingle supply operation, 1.8 V 3.3 VMinimum +8.0V LCD driving output voltageMaximum +15.0V LCD driving output voltageLow current sleep modeOn-chip voltage generator or external LCD driving power supply selectableOn-chip ...
SSD1852: Features: 128 x 128 Dot-matrix 4-gray levels display driver with an icon lineSingle supply operation, 1.8 V 3.3 VMinimum +8.0V LCD driving output voltageMaximum +15.0V LCD driving output voltageLow...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit |
VDD | Supply Voltage | -0.3 to 4.0 | V |
VCC | -0.3 to 15 | V | |
VCI | Booster Supply Voltage | -0.3 to 4.0 | V |
Vin | Input Voltage | -0.3 to VDD + 0.3 | V |
I | Current Drain Per Pin Excluding VDD and VSS | 25 | mA |
TA | Operating Temperature | -30 to +85 | °C |
Tstg | Storage Temperature Range | -40 to +85 | °C |
This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields; however, it is advised that normal precautions to be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. For proper operation it is
recommended that Vin and Vout be constrained to the range VSS < or = (Vin or VOUT) < or = VDD. Reliability of operation is enhanced if unused input are connected to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open. This device may be light sensitive. Caution should be taken to avoid exposure of this device to any light source during normal operation. This device is not radiation protected.
SSD1852 is a single-chip CMOS LCD driver with controller for liquid crystal dot-matrix graphic display system. It consists of 257 high voltage driving output pins for driving 128 Segments, 128 Commons and an ICON line.
SSD1852 displays data directly from its internal 128x129x2 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through a hardware selectable 6800/8080series compatible Parallel Interface or 3/4 wires Serial Peripheral Interface.
SSD1852 embeds a DC-DC Converter, an LCD Voltage Regulator, an On-Chip Bias Divider and an On-Chip Oscillator, which reduce the number of external components. With the special design on minimizing power consumption and die/package layout, SSD1852 is suitable for any portable battery-driven applications requiring a long operation period and compact size.