ST62E18C

The ST62E18C is designed as 8-BIT MCUs with A/D converter, auto-reload with timer, uart, OSG, safe reset and 20-pin package.

ST62E18C has many features. The first one is 3.0 to 6.0V supply operating range. The second one is 8 MHz maximum clock frequency. The third one is -40 to +125°C operating temperature range. The fourth one is run, wait and stop modes. The fifth one is 5 interrupt vectors. The sixth one is look-up table capability in program memory. The seventh one is data storage in program memory: user selectable size. The eighth one is data RAM which would be 192 bytes. The ninth one is user programmable options. The tenth one is 12 I/O pins, fully programmable as: input with pull-up resistor, input without pull-up resistor, input with interrupt generation, open-drain or push-pull output and analog input. The eleventh one is 5 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly. The twelfth one is 8-bit Timer/Counter with 7-bit programmable prescaler. The thirteenth one is 8-bit Auto-reload Timer with 7-bit programmable prescaler (AR Timer). And so on. That are all the main features.

Some absolute maximum ratings of ST62E18C have been concluded into several points as follow. The first one is about its supply voltage which would be from -0.3 to 7.0 V. The second one is about its input voltage which would be from VSS - 0.3 to VDD + 0.3 V. The third one is about its output voltage which would be from VSS - 0.3 to VDD + 0.3 V. The fourth one is about its total current into VDD (source) which would be 80 mA. The fifth one is about its total current out of VSS (sink) which would be 100 mA. The sixth one is about its junction temperature which would be 150°C. The seventh one is about its storage temperature which would be from -60 to 150°C. And so on. For more information please contact us.