STC4130

Note 1: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
Devices should not be operated outside the Recommended Operating Conditions.

The STC4130 is a ROHS compatible, integrated, single chip solution for the synchronous clock in SDH and SONET network elements. The device is fully compliant with ITU-T G.812 Type III, G.813, and Telcordia GR1244, and GR253.

The STC4130 accepts 12 reference inputs and generates 8 independent synchronized output clocks.
Reference input frequencies are automatically detected, and inputs are individually monitored for quality. Active reference selection may be manual or automatic. All reference switches are hitless. Synchronized outputs  ay be programmed for a wide variety of SONET and SDH frequencies.

Two independent clock generators provide the standardized T0 and T4 functions. Each clock generator includes a DPLL (Digital Phase-Locked Loop), which may operate in the Freerun, Synchronized, and Holdover modes. Both clock generators support master/ slave operation for redundant applications. Connor- Winfield's proprietary SyncLink^TM Cross-couple data link provides master/slave phase information and state data to ensure seamless side switches.

A standard SPI serial bus interface or parallel bus provide access to the STC4130's comprehensive, yet simple to use internal control and status registers.

The device operates with an external OCXO or TCXO as its MCLK at either 10 or 20 MHz.