SY10EL16VA-VF

Features:

·3.3V and 5V power supply options
·250ps propagation delay
·Very high voltage gain vs. standard EL16 or EL16V
·Ideal for Pulse Amplifier and Limiting Amplifier applications
·Data synchronous Enable/Disable (/EN) on QHG and /QHG provides for complete glitchless gating of the outputs
·Ideal for gating timing signals
·Complete solution for high quality, high frequency crystal oscillator applications
·Internal 75K Ohm input pull-down resistors
·Available in both 8 and 16-pin SOIC package; 8 and 10-pin (3mm) MSOP and in DIE form


Pinout




Description

The SY10EL16VA-VF/100EL16VA-VF are differential receivers. The devices are equivalent to SY10EL16VA-VF/100EL16 or SY10/ 100EL16V with enhanced capabilities. The QHG, /QHG outputs have a DC gain several times larger than the DC gain of the Q output.
The SY10/100EL16VA have an identical pinout to the SY10EL16VA-VF/100EL16 or SY10EL16VA-VF/100EL16V. SY10EL16VA-VF provides a VBB output for either single-ended application or as a DC bias for AC coupling to the device.
The SY10EL16VA-VF/100EL16VB are very similar to the SY10/ 100EL16VA. The /Q output is provided for feedback purposes.
The SY10EL16VA-VF/100EL16VC provides an /EN input which is synchronized with the data input (D) signal in a way that provides glitchless gating of the QHG and /QHG outputs. When the /EN signal is LOW, the input is passed to the outputs and the data output equals the data input. When the data input is HIGH and the /EN goes HIGH, SY10EL16VA-VF will force the QHG LOW and the /QHG HIGH on the next negative transition of the data input. If the data input is LOW when the /EN goes HIGH, the next data transition to a HIGH is ignored and QHG remains LOW and /QHG remains HIGH. The next positive transition of the data input is not passed on to the data outputs under these conditions. The QHG and /QHG outputs remain in their disabled state as long as the /EN input is held HIGH. The /EN input has no influence on the /Q output and the data input is passed on (inverted) to this output whether /EN is HIGH or LOW. This configuration is ideal for crystal oscillator applications, where the oscillator can be free running and gated on and off synchronously without adding extra counts to the output.
The SY10EL16VA-VF/100EL16VD provides the flexibility of all the combinations in DIE form, in 16-pin 150mil SOIC package or in 10-pin MSOP package. The 16-pin SOIC and 10-pin MSOP packages are ideal for prototyping DIE applications. The SY10EL16VA-VF/100EL16VE are similar to the SY10EL16VA-VF/100EL16VB where the Q, /Q output is made available differently. In this package option, VBB is no longer provided.
The SY10EL16VA-VF/100EL16VF are similar to the SY10EL16VA-VF/100EL16VC, offering the D, /D inputs rather than the VBB output.