Features: Single 3.3V or 5V power supplyUp to 622Mbps operationLow noise PECL data outputsChatter-free PECL Signal Detect (SD) outputTTL /EN inputProgrammable SD level set (SDLVL)Available in a tiny 10-pin MSOP (3mm) packageApplication622Mbps SONET/SDH Small form factor transceivers High-gain line...
SY88713V: Features: Single 3.3V or 5V power supplyUp to 622Mbps operationLow noise PECL data outputsChatter-free PECL Signal Detect (SD) outputTTL /EN inputProgrammable SD level set (SDLVL)Available in a tiny...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

The SY88713V low-power limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88713V quantizes these signals and outputs PECL level waveforms.
The SY88713V operates from a single +3.3V or +5V power supply, over temperatures ranging from 40°C to +85°C. With its wide bandwidth and high gain, signals with data rates up to 622Mbps and as small as 5mVp-p can be amplified to drive devices with PECL inputs.
The SY88713V generates a PECL SD output. A programmable signal-detect level set pin (SDLVL) sets the sensitivity of the input amplitude detection. SD asserts high if the input amplitude rises above the threshold set by SDLVL and deasserts low otherwise. /EN deasserts the true output signal without removing the input signal. Typically 4.6dB SD hysteresis is provided to prevent chattering.