SiP21108

The SiP21108 BiCMOS 150 mA low noise LDO voltage regulators are the perfect choice for low battery operated low powered applications. An Ultra low ground current and low dropout voltage of 135 mV at 150 mA load helps to extend battery life for portable electronics. Systems requiring a quiet voltage source, such as RF applications, will benefit from the SiP21106 low output noise.

The SiP21108 do not require a noise bypass cpacitor and provides an error flag pin (POK or Power OK). POK output requires an external pull-up resistor and goes low when the supply has not come up to voltage.

The SiP21108 output is adjusted with an external resistor network.

The SiP21106/7/SiP21108 regulators allow stable operation with very small ceramic output capacitors, reducing board space and component cost. They are designed to maintain regulation while delivering 330 mA peak current upon turn-on. During start-up, an active pull-down circuit improves the output transient response and regulation. In shutdown mode, the output automatically discharges to ground through a 100 NMOS. The SiP21106/7/SiP21108 are available in TSOT23-5L and a super thin lead (Pb)-free TSC75-6L packages for operation over the industrial operation range (- 40 °C to 85 °C).