TB1261F

· IF
· Integrated PIF VCO, aligned automatically.
· Inter/ split carrier input
· SIF BPF built-in
· SIF Trap filter built in
· Tank-less SIF demodulator
· Neg/pos demodulation PIF line up *
· AM sound demodulation line up *
· Video
· Chroma trap
· Y delay line
· Black stretch
· Y-gamma
· Pre/over shoot control
· VM signal output
· *; TB1262F only
· Chroma
· PAL/ NTSC/ SECAM demodulation
· with 1Xtal and Built in 1HDL system
· External YCbCr in/out Interface
· Base band TINT
· SCART RGB interface
· RGB Analog RGB interface
· Half-tone and transparent for OSD
· RGB cut-off/ drive controls by bus
· ABCL (ABL and ACL combined)
· Sync./ DEF HVCO integrated
· V saw tooth single output
· EW output available for flat wide TV

(*1) When using this device at above Ta=25, the power dissipation decreases by 15.9mV per 1 rise.

(*2) This IC is weak against static electricity and surge impulse. Please take counter measure to meet, if necessary.

(*3) This IC is not proofed enough against a strong E-M field by CRT which mau cause function error
and/or poor characteristics. Keeping the distance from CRT to the IC longer than 20cm, or if cannot,
placing shield metal over the IC, is recommended in an application.

The TB1261F/TB1262F are TV signal processor ICs, which contains PIF, SIF, Video, Chroma and Deflection blocks. They can be applied for worldwide Multi system TV sets.

The flexibility of this TB1261F/TB1262F contributes to reduce development costs and components in a TV set.