DescriptionThe TC74AC377 is an advanced high speed CMOS octal D-type flip-flop fabricated with silicon gate and doublelayer metal wiring C2MOS technology.It achieves the high speed operation similar to equivalent Bipolar Schottky TTL, while maintaining the CMOS low power dissipation.These 8-bit D-...
TC74AC377: DescriptionThe TC74AC377 is an advanced high speed CMOS octal D-type flip-flop fabricated with silicon gate and doublelayer metal wiring C2MOS technology.It achieves the high speed operation similar...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TC74AC377 is an advanced high speed CMOS octal D-type flip-flop fabricated with silicon gate and doublelayer metal wiring C2MOS technology.It achieves the high speed operation similar to equivalent Bipolar Schottky TTL, while maintaining the CMOS low power dissipation.These 8-bit D-type flip-flops are controlled by a clock input(CK) and a output enable input (G).
Features of the TC74AC377 are:(1)high speed:fMAX=140MHz (typ.) at Vcc= 5V; (2)low power dissipation:Icc= 8A (max.) at Ta=25; (3)high noise immunity:VNIH=VNIL=28% Vcc(min.); (4)pin and function compatible with 74F377; (5)available in DIP, SOIC and SOP packages; (6)balanced propagation delays:tpLH= tpHL; (7)wide operating voltage range:Vcc(opr.) = 2V~5.5V.The signal level applied to the D inputs are transferred to Q outputs during the positive going transition of CK.When the G is high, the eight outputs are in a high impedance state.All inputs are equipped with protection circuits against static discharge or transient excess voltage.
The absolute maximum ratings of the TC74AC377 can be summarized as:(1)supply voltage range:-0.5 to 7.0V;(2)DC input voltage:-0.5 to Vcc+0.5V;(3)DC output voltage:-0.5 to Vcc+0.5V;(4)input diode current:±20mA;(5)output diode current:±50mA;(6)DC output current:±50mA;(7)DC Vcc/ground current:±200mA;(8)power dissipation:500mW; (9)storage temperature:-65 to 150;(10)lead temperature:300.The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products of the TC74AC377 in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.