TC7MPN3245FTG

Input Level :
Output Level :
Logic Family :
Packaging :
Number of Channels per Chip : 8
Output Type : 3-State
Logic Type : CMOS
Maximum Operating Temperature : + 85 C
Supply Voltage - Max : 2.7 V, 3.6 V
High Level Output Current : - 9 mA
Low Level Output Current : 9 mA
Supply Voltage - Min : 1.1 V, 1.65 V
Propagation Delay Time : 18.5 ns
Package / Case : VQON-24


Features:

• Bidirectional interface between 1.2-V and 1.8-V, 1.2-V and 2.5-V, 1.2-V and 3.3-V, 1.5-V and 2.5-V, 1.5-V and 3.3-V,
1.8-V and 2.5-V, 1.8-V and 3.3-V or 2.5-V and 3.3-V buses.
• High-speed operation : tpd = 13.7 ns (max) (VV_CCA  = 2.5 ± 0.2 V, VCCB = 3.3 ± 0.3 V)
t_pd = 14.8 ns (max) (V_CCA = 1.8 ± 0.15 V, V_CCB = 3.3 ± 0.3 V)
t_pd   = 16.0 ns (max) (V_CCA = 1.5 ± 0.1 V, V_CCB= 3.3 ± 0.3 V)
t_pd    = 61 ns (max) (V_CCA = 1.2 ± 0.1 V, V_CCB = 3.3 ± 0.3 V)
t_pd    = 18.5 ns (max) (V_CCA = 1.8 ± 0.15 V, V_CCB = 2.5 ± 0.2 V)
t_pd    = 19.7 ns (max) (V_CCA = 1.5 ± 0.1 V, V_CCB= 2.5 ± 0.2 V)
t_pd   = 60 ns (max) (V_CCA = 1.2 ± 0.1 V, V_CCB= 2.5 ± 0.2 V)
t_pd    = 58 ns (max) (V_CCA = 1.2 ± 0.1 V, V_CCB= 1.5 ± 0.1 V)
• Output current : IOHB/IOLB = ±3 mA (min) (V_CCB = 3.0 V)
IOHB/IOLB = ±2 mA (min) (V_CCB = 2.3 V)
IOHB/IOLB = ±0.5 mA (min) (V_CCB = 1.65 V)
IOHA/IOLA = ±9 mA (min) (VV_CCA = 2.3 V)
IOHA/IOLA = ±3 mA (min) (VV_CCA = 1.65 V)
IOHA/IOLA = ±1 mA (min) (VV_CCA = 1.4 V)
• Latch-up performance: ±300 mA
• ESD performance: Machine model ±200 V Human body model ±2000 V
• Ultra-small package: VQON24
• Low current consumption : Using the new circuit significantly reduces current consumption when OE = "H". Suitable for battery-driven applications such as PDAs and cellular phones.
• Floating A-bus and B-bus are permitted. (when OE = "H") 3.6-V tolerant function and power-down protection provided on all inputs and outputs.

Note 1: Do not apply a signal to any bus pin when it is in the output mode. Damage may result.
Note 2: RA or RMA flux is recommended when mounting the VQON package.


Pinout




Specifications

Characteristics	Symbol	Rating	Unit
Power supply voltage (Note 2)	VCCA	−0.5 to 4.6	V
	VCCB	−0.5 to 4.6
DC input voltage (DIR, OE )	VIN	−0.5 to 4.6	V
DC bus I/O voltage	VI/OA	−0.5 to 4.6 (Note 3)	V
		−0.5 to VCCA + 0.5 (Note 4)
	VI/OB	−0.5 to 4.6 (Note 3)
		−0.5 to VCCB + 0.5 (Note 4)
Input diode current	IIK	−50	mA
Output diode current	II/OK	±50 (Note 5)	mA
DC output current	IOUTA	±25	mA
	IOUTB	±6	mA
DC VCC/ground current per supply pin	ICCA	±50	mA
	ICCB	±50	mA
Power dissipation	PD	180	mW
Storage temperature	Tstg	−65 to 150

Note 1: Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC performance
or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. eliability test report and estimated failure rate, etc).

Note 2: Do not supply a voltage to VCCB pin when VCCA is in the OFF state.

Note 3: Output in OFF state

Note 4: High or Low state. IOUT absolute maximum rating must be observed.

Note 5: VOUT < GND, VOUT > VCC