TCU10B60

The TCU10B60 is designed as onr kind of FRD type for power factor improvement high frequency rectification.

It has four features. (1)Dual diodes and cathode common. (2)Ultra fast recovery. (3)Low forward voltage drop. (4)High surge capability. Those are all the main features.

Some absolute maximum ratings TCU10B60 have been concluded into several points as follow. (1)Its repetitive peak reverse voltage would be 600V. (2)Its average rectified output current would be 10A at Tc=77°C and 50Hz full sine wave resistive load. (3)Its RMS forward current would be 11.1A. (4)Its surge forward current would be 60A at 50Hz full sine wave 1cycle non-repetitive. (5)Its operating junction temperature range would be from -40°C to 150°C. (6)Its storage temperature range would be from -40°C to 150°C. (7)Its mounting torque would be 0.5Nm as recommended value. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics TCU10B60 are concluded as follow. (1)Its peak reverse current would be max 30uA with test conditions of Tj=25°C and Vrm=Vrrm per Arm. (2)Its peak forward voltage would be typ 2.3V and max 2.7V with test conditions of Tj=25°C, Ifm=5A per Arm. (3)Its reverse recovery time would be typ 19ns and max 30ns with test conditions of Ifm=10A and di/dt=50A/us and Ta=25°C. (4)Its thermal resistance would be max 3°C/W for junction to case. (5)Its forward current vs voltage would be 3.6A at instantaneous forward voltage of 2.5V for Tj=25°C and would be 14A at instantaneous forward voltage of 2.5V. (6)Its average forward power dissipation would be 15W at average forward current of 8A for sine wave and would be 16W at average forward current of 8A for rect 180°. And so on. If you have any question or suggestion or want to know more information please contact us for TCU10B60 details. Thank you!