Features: Distinctive features· Universal mains supply operation (70 to 276 V AC)· High level of integration, giving a very low external component count.Green features· Valley or zero voltage switching for minimum switching losses· Efficient quasi-resonant operation at high power levels· Frequency...
TEA1533AT: Features: Distinctive features· Universal mains supply operation (70 to 276 V AC)· High level of integration, giving a very low external component count.Green features· Valley or zero voltage switch...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.63 - .91 / Piece
Switching Converters, Regulators & Controllers POWERPLUG
Besides typical application areas, i.e. adapters and chargers, the device can be used in TV and monitor supplies and all applications that demand an efficient and cost-effective solution up to 250 W.
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
Voltages | |||||
VCC |
supply voltage |
continuous |
-0.4 |
+20 |
V |
VCTRL |
voltage on pin CTRL |
-0.4 |
+5 |
V | |
VDEM |
voltage on pin DEM |
current limited |
-0.4 |
- |
V |
Vsense |
voltage on pin Isense |
current limited |
-0.4 |
- |
V |
VDRAIN |
voltage on pin DRAIN |
-0.4 |
+650 |
V | |
Currents | |||||
ICTRL |
current on pin CTRL |
d < 10 % |
- |
5 |
mA |
IDEM |
current on pin DEM |
-250 |
+250 |
A | |
Isense |
current on pin Isense |
-1 |
+10 |
mA | |
IDRIVER |
current on pin DRIVER |
d < 10 % |
-0.8 |
+2 |
A |
IDRAIN |
current on pin DRAIN |
- |
5 |
mA | |
General | |||||
Ptot |
total power dissipation |
Tamb < 70 °C |
- |
0.75 |
W |
Tstg |
storage temperature |
-55 |
+150 |
°C | |
Tj |
operating junction temperature |
-20 |
+145 |
°C | |
Vesd |
electrostatic discharge voltage pins 1 to 13 pin DRAIN any pin |
HBM class 1; note 2 HBM class 1; note 2 MM; note 3 |
- - - |
2000 1500 400 |
V V V |
Notes
1. All voltages are measured with respect to ground; positive currents flow into the IC; pin VCC may not be current driven. The voltage ratings are valid provided other ratings are not violated; current ratings are valid provided the mum power rating is not violated.
2. Human Body Model (HBM): equivalent to discharging a 100 pF capacitor through a 1.5 k resistor.
3. Machine Model (MM): equivalent to discharging a 200 pF capacitor through a 0.75 H coil and a 10 resistor.
The TEA1533AT GreenChipä(1)II is the second generation of green Switched Mode Power Supply (SMPS) control ICs operating directly from the rectified universal mains. A high level of integration leads to a cost effective power supply with a very low number of external components.
The TEA1533AT special built-in green functions allow the efficiency to be optimum at all power levels. This holds for quasi-resonant operation at high power levels, as well as fixed frequency operation with valley switching at medium power levels. At low power (standby) levels, the system operates at a reduced frequency and with valley detection.
The TEA1533AT proprietary high voltage BCD800 process makes direct start-up possible from the rectified mains voltage in an effective and green way. A second low voltage BICMOS IC is used for accurate, high-speed protection functions and control.
Highly efficient and reliable supplies can easily be designed using the GreenChipII control IC.