TL061CP

Output Current :
Number of Channels : 1
Packaging : Tube
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Mounting Style : Through Hole
Package / Case : PDIP-8
Maximum Operating Temperature : + 70 C
Input Offset Voltage : 15 mV
Operating Supply Voltage : 30 V
Input Bias Current (Max) : 200 pA
Slew Rate : 3.5 V/us


Description

The TL061CP is designed as JFET-input operational amplifier which features high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents.

TL061CP has ten features. (1)Very low power consumption. (2)Typical supply current would be 200A (per amplifier). (3)Wide common-mode and differential voltage ranges. (4)Low input bias and offset currents. (5)Common-mode input voltage range includes VCC+. (6)Output short-circuit protection. (7)High input impedance JFET-input stage. (8)Internal frequency compensation. (9)Latch-up-free operation. (10)High slew rate which would be 3.5V/s typ. That are all the main features.

Some absolute maximum ratings of TL061CP have been concluded into several points as follow. (1)Its supply voltage Vcc+ would be 18V. (2)Its supply voltage Vcc- would be -18V. (3)Its differential input voltage would be +/-30V. (4)Its input voltage would be +/-15V. (5)Its duration of output short circuit would be unlimited. (6)Its package thermal impedance would be 85°C/W. (7)Its operatig virtual junction temperature would be 150°C. (8)Its lead temperature 1.6mm (1/16 inch) from case for 10 seconds would be 260°C. (9)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TL061CP are concluded as follow. (1)Its input offset voltage would be typ 3mV and max 15mV. (2)Its temperature coefficient of input offset voltage would be typ 10uV/°C. (3)Its input offset current would be typ 5pA and max 200pA. (4)Its input bias current would be typ 30pA and max 400pA. (5)Its common mode input voltage range would be min +/-11V and typ -12 to 15V. (6)Its maximum peak output voltage swing would be min +/-10V and typ +/-13.5V. (7)Its large signal differential voltage amplification would be min 3V/mV and typ 6V/mV. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	TL061CP
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	J-FET
Number of Circuits	1 - Single
Package / Case	8-DIP (300 mil)
Slew Rate	3.5 V/s
Gain Bandwidth Product	1MHz
Current - Supply	200A
Current - Output / Channel	-
Voltage - Supply, Single/Dual (±)	7 V ~ 36 V, ±3.5 V ~ 18 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	30pA
Operating Temperature	0°C ~ 70°C
Voltage - Input Offset	3000V
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TL061CP TL061CP 296 12942 5 ND 296129425ND 296-12942-5