Purchase TL751M08C, In-stock TL751M08C From SeekIC.
Part Number: TL751M08C
Description: The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for bat...
- Table of contents:
TL751M08C
-
Suppliers
DataSheet
General Description
TL751M08C General Description
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for battery-powered systems. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection circuitry to protect the devices and the regulated system. Both series are fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current, even during full-load conditions, makes the TL750M and TL751M series ideal for standby power systems.
The TL750M and TL751M series offers 5-V, 8-V, 10-V, and 12-V options. The TL751M series has the addition of an enable (ENABLE) input. The ENABLE input gives the designer complete control over power up, allowing sequential power up or emergency shutdown. When ENABLE is high, the regulator output is placed in the high-impedance state. The ENABLE input is TTL- and CMOS-compatible.
The TL750MxxC and TL751MxxC are characterized for operation over the virtual junction temperature range 0°C to 125°C.
TL751M08C Maximum Ratings
Continuous input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . 26 V
Transient input voltage (see Figure 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .60 V
Continuous reverse input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Transient reverse input voltage: t = 100 ms . . . . . . . . . . . . . . . . . . . . . . . ... . 50 V
Package thermal impedance, JA (see Notes 1 and 2): KC package . . . . . . .22°C/W
KTE package. . . . . . .23°C/W
KTG package. . . . . . .23°C/W
KTP package. . . . . . .28°C/W
Virtual junction temperature range, TJ . . . . . . . . . . . . . . .. . . . . . . . . . 0°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . .. . . . .. . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . .. . . . . . . . . . . .65°C to 150°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150°C can impact reliability. Due to variation in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation.
2. The package thermal impedance is calculated in accordance with JESD 51.
Transient input voltage (see Figure 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .60 V
Continuous reverse input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Transient reverse input voltage: t = 100 ms . . . . . . . . . . . . . . . . . . . . . . . ... . 50 V
Package thermal impedance, JA (see Notes 1 and 2): KC package . . . . . . .22°C/W
KTE package. . . . . . .23°C/W
KTG package. . . . . . .23°C/W
KTP package. . . . . . .28°C/W
Virtual junction temperature range, TJ . . . . . . . . . . . . . . .. . . . . . . . . . 0°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . .. . . . .. . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . .. . . . . . . . . . . .65°C to 150°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150°C can impact reliability. Due to variation in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation.
2. The package thermal impedance is calculated in accordance with JESD 51.
TL751M08C Connection Diagram
TL751M08CKTG
PDF/DataSheet Download
- Datasheet: TL751M08CKTG
- File Size: 173683 KB
- Manufacturer: TI [Texas Instruments]
- Click here to Download
- ·TL712
- TI [Texas Instruments]
- DIFFERENTIAL COMPARATOR
- 82822 KB
- ·TL712CD
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 261175 KB
- ·TL712CDRE4
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 265349 KB
- ·TL712CP
- TI [Texas Instruments]
- DIFFERENTIAL COMPARATOR
- 82822 KB
- ·TL712CPE4
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 265349 KB
- ·TL712CPSR
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 261175 KB
- ·TL712CPW
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 261175 KB
- ·TL712CPWE4
- Texas Instruments
- DIFFERENTIAL COMPARATOR
- 265349 KB
TL751M08C Relative Products
TL751M05QKTTRQ1
IC LDO POS-VOLT REG 5V D2PAK-5
TL751M05CKTGR
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed forbattery-powered systems. The TL750M and TL751M series incorporate onboard overvoltage and current-limitingprotection circuitry to protect the devices and the re...
TL751M05C
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for battery-powered systems. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection circuitry to protect the devices and the ...
TL751M
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for battery-powered systems. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection circuitry to protect the devices and the ...
TL751L12CDRE4
IC LDO REG 150MA 12V 8-SOIC
-
TL751L12CDR
IC LDO POS-VOLT REG 12V 8-SOIC
Hotspot Suppliers Product
TNY277PN
Price: 0.17-0.993 USD
8DIP, Off-Line Switcher, 880A
TPS3828-33DBVR
Price: 0.1-1 USD
Processor supervisory circuit, SOT23-5, 200 ms, Manual Reset Input
LT1054CP
Price: 0.35-0.6 USD
voltage converter, -5V, 0.1A, 8DIP, 25kHz, RoHS Compliant, External Shutdown
15-06-0040
Price: 0.15-0.18 USD
receptacle, 4-pin, 15-06-0040, Molex
HCGF5A2G222Y
Price: 11-12 USD
screw terminal type, aluminum electrolytic capacitors, 5mA, 160 to 450VDC, 120Hz, HCGF5A2G222Y
UPD78P064GF
Price: 0.95-2.4 USD
8-bit, single-chip microcontroller, QFP, -0.3 to 0.3V, NEC, UPD78P064GF
AK4542VQ
Price: 1.3-3 USD
AK4542VQ, QFP, Asahi Kasei Microsystems
CL-GD5429-86QC-C
Price: 1.5-2.5 USD
CL-GD5429-86QC-C, QFP, Integrated Circuits
DS90CR288AMTD
Price: 6-8 USD
28-bit channel link, TSSOP56, -0.3V to +4V
LP2980IM5X-3.0
Price: 0.22-0.3 USD
50 mA, fixed-output voltage regulator, SOT23-5, High peak current capability, SOT23-5
2SC5967
Price: 1.5-5 USD
2SC5967 - Ultrahigh-Definition CRT Display Horizontal Deflection Output Applications - Sanyo Semic...
MCZ3001D
Price: 2.85-2.95 USD
Audio Power Supply, DIP-18, Shindengen Electric Mfg.Co.Ltd, Integrated Circuits
