TLC2272CDR

The TLC2272CDR is one member of the TLC2272 series.The TLC2272 is dual and quadruple operational amplifier from Texas instruments.The TLC227x family offers 2 MHz of bandwidth and 3 V/s of slew rate for higher speed applications.These devices offer comparable ac performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers.

Features of the TLC2272CDR are:(1)output swing includes both supply rails; (2)low input bias current:1 pA typ; (3)fully specified for both single-supply and split-supply operation; (4)common-mode input voltage range includes negative rail; (5)high-gain bandwidth:2.2 MHz typ; (6)high slew rate:3.6 V/s typ; (7)highrel automotive applications; (8)configuration control / print support; (9)qualification to automotive standards.If the design requires single amplifiers, see the TLV2211/21/31 family.These devices are single rail-to-rail operational amplifiers in the SOT-23 package.Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

The absolute maximum ratings of the TLC2272CDR can be summarized as:(1)supply voltage:-8 to 8V;(2)storage temperature range:-65 to 150;(3)output current:±50mA;(4)operating free-air temperature range:0 to 70.Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.