TLE2161B

Features: Excellent Output Drive Capability VO = ± 2.5 V Min at RL = 100 W, VCC± = ± 5 V VO = ± 12.5 V Min at RL = 600 W, VCC± = ± 15 VLow Supply Current . . . 280 mA TypDecompensated for High Slew Rate and Gain-Bandwidth Product AVD = 0.5 Min Slew Rate = 10 V/ms Typ Gain-Bandwidth Product = 6.5 M...

product image

TLE2161B Picture
SeekIC No. : 004520943 Detail

TLE2161B: Features: Excellent Output Drive Capability VO = ± 2.5 V Min at RL = 100 W, VCC± = ± 5 V VO = ± 12.5 V Min at RL = 600 W, VCC± = ± 15 VLow Supply Current . . . 280 mA TypDecompensated for High Slew ...

floor Price/Ceiling Price

Part Number:
TLE2161B
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/17

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

 Excellent Output Drive Capability
    VO = ± 2.5 V Min at RL = 100 W, VCC± = ± 5 V
    VO = ± 12.5 V Min at RL = 600 W, VCC± = ± 15 V
Low Supply Current . . . 280 mA Typ
Decompensated for High Slew Rate and Gain-Bandwidth Product
    AVD = 0.5 Min
    Slew Rate = 10 V/ms Typ

    Gain-Bandwidth Product = 6.5 MHz Typ

Wide Operating Supply Voltage Range
    VCC ± = ± 3.5 V to ± 18 V
High Open-Loop Gain . . . 280 V/mV Typ
Low Offset Voltage . . . 500 mV Max
Low Offset Voltage Drift With Time. . . 0.04 mV/Month Typ
Low Input Bias Current . . . 5 pA Typ




Application

input characteristics
The TLE2161, TLE2161A and TLE2161B are specified with a minimum and a maximum input voltage that if exceeded at either input could cause the device to malfunction.
Because of the extremely high input impedance and resulting low bias-current requirements, the TLE2161,TLE2161A, and TLE2161B are well suited for low-level signal processing; however, leakage currents on printed circuit boards and sockets can easily exceed bias-current requirements and cause degradation in system performance. It is a good practice to include guard rings around inputs (see Figure 38). These guards should be driven from a low-impedance source at the same voltage level as the common-mode input.

input offset voltage nulling
The TLE2161 series offers external null pins that can further reduce the input offset voltage. The circuit in Figure 39 can be connected as shown if the feature is desired. When external nulling is not needed, the null pins may be left disconnected.



Specifications

Supply voltage, VCC + (see Note 1):19 V
Supply voltage, VCC : 19 V
Differential input voltage, VID (see Note 2) : ± 38 V
Input voltage range, VI (any input):VCC ±
Input current, II (each input):± 1 mA
Output current, IO :± 80 mA
Total current into VCC +: 80 mA
Total current out of VCC :80 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) :unlimited
Continuous total power dissipation :See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix : 0°C to 70°C
                                                                   I suffix : 40°C to 85°C
                                                                   M suffix : 55°C to 125°C
Storage temperature range, Tstg : 65°C to 150°C
Case temperature for 60 seconds: FK package :260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package: 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60seconds: JG package :300°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC +, and VCC .
2. Differential voltages are at IN+ with respect to IN .
3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded.




Description

The TLE2161, TLE2161A, and TLE2161B are JFET-input, low-power, precision operational amplifiers manufactured using the Texas Instruments Excalibur process. Decompensated for stability with a minimum closed-loop gain of 5,
these TLE2161B combine outstanding output drive capability with low power consumption, excellent dc precision, and high gain-bandwidth product.
In addition to maintaining the traditional JFET advantages of fast slew rates and low input bias and offset currents, the Excalibur process offers outstanding parametric stability over time and temperature. This results in a TLE2161B that remains precise even with changes in temperature and over years of use.

A variety of available options includes small-outline packages and chip-carrier versions for high-density system
applications.
The C-suffix TLE2161B are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Circuit Protection
LED Products
Audio Products
Connectors, Interconnects
Cables, Wires - Management
Transformers
View more