TLE5010

Note:Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DD or V_IN < GND) the voltage on V_DD pins with respect to ground (GND) must not exceed the values defined by the absolute maximum ratings.

The TLE5010 is a 360° angle sensor, which detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated GMR elements (Giant Magnetic Resistance).

Data communication is done with a bi-directional SSC interface (SPI compatible).

The sine and cosine values can be read out. These signals can be digitally processed to calculate the angle orientation of the magnetic field (magnet). This calculation can be done by using a cordic algorithm.
It is possible to connect more than one TLE5010 to one SSC Interface of a C for redundancy or any other reasons.

In this case the synchronization of the connected TLE5010 is done by a broadcast command.
Each connected TLE5010 can be addressed by a dedicated chip select CS pin.

Online diagnostic functionalities are provided to ensure a reliable operation.
These are

•Angle Test (generated via test voltages feeding the ADC).
•Crossed signal paths (switchable for comparison)
•Inverted signs of bit streams
•Over and undervoltage detections