TLP3022(S)

Series: -
Number of Channels: 1
Current - Gate Trigger (Igt) (Max): 10mA
Mounting Type: Through Hole
Packaging: Tube
Output Type: AC, Triac, Standard
Voltage - Isolation: 5000Vrms
Voltage - Off State: 400V
Current - Output / Channel: 100mA
Package / Case: 6-DIP (0.300", 7.62mm), 5 Leads
Manufacturer: Toshiba
Current - Hold (Ih): 600µA
Current - DC Forward (If): 20mA
Supplier Device Package: 6-DIP (Cut), 5 Lead


Features:

·  Peak Off-State Voltage : 400 V (min)
·  Trigger LED Current : 15 mA (max) (TLP3021(S))
                                       10 mA (max) (TLP3022(S))
                                         5 mA (max) (TLP3023(S))
·  On-State Current : 100 mA (max)
·  Isolation Voltage : 5000Vrms(Min)
·  UL Recognized : UL1577,File No.E67349
·  SEMKO Approved : SS EN60065
·  BSI Approved : BS EN60065, File No.8385
                             BS EN60950, File No.8386
·  Option (D4) type VDE approved: DIN EN60747-5-2 Approved No. 40009302
     Maximum operating insulation voltage: 890VPK
     Highest permissible over voltage: 8000VPK



Pinout




Specifications

CHARACTERISTIC			SYMBOL	RATING	UNIT
LED	Forward Current		IF	50	mA
	Forward Current Derating (Ta53)		∆IF /	-0.7	mA /
	Peak Forward Current (100s pulse, 100pps)		IFP	1	A
	Power Dissipation		PD	100	mW
	Power Dissipation Derating (Ta25)		∆PD /	-1.0	mW/
	Reverse Voltage		VR	5	V
	Junction Temperature		Tj	125
DETECTOR	Off-State Output Terminal Voltage		VDRM	400	V
	On-State RMS Current	Ta=25	IT(RMS)	50	mA
		Ta=70		100
	On-State Current Derating (Ta25)		∆IT/	-1.1	mA /
	Peak On-State Current (100s pulse, 120pps)		ITP	2	A
	Peak Nonrepetitive Surge Current (Pw=10ms,DC=10%)		ITSM	1.2	A
	Power Dissipation		PD	300	mW
	Power Dissipation Derating (Ta25)		∆PD /	-4.0	mW/
	Junction Temperature		Tj	115
Storage Temperature Range			Tstg	−55~150
Operating Temperature Range			Topr	−40~100
Lead Soldering Temperature (10s)			Tsol	260
Total Package Power Dissipation			PT	330	mW
Total Package Power Dissipation Derating (Ta25)			∆PT/	-4.4	mW /
Isolation Voltage (AC,1min. , R.H.60%)                      (Note 2)			BVS	5000	Vrms

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and 
          the significant change in temperature, etc.) may cause this product to decrease in the reliability
          significantly  even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within
          the absolute maximum ratings.

          Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
          ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability 
          test report and estimated failure rate, etc).

(Note 2) Device considered a two terminal device :Pins1,2 and 3 shorted together and pin4 and pin6 
              shorted together.


Description

The TOSHIBA TLP3022(S), TLP3022 (S) and TLP3023 (S) consist of photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP.