Features: 30-m, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source and Sink
0.9-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed Output Voltage Devices With 1.0% Initial Accuracy
Internally Compensated for Easy Use and Minimal Component Count
Fast Transient Response
Wide PWM Frequency − Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Total Cost
Application Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V
Point of Load Regulation for High Performance DSPs, FPGAs, ASICs and Microprocessors
Broadband, Networking and Optical Communications Infrastructure
Portable Computing/Notebook PCsPinout
Specifications
Input voltage range V
range, VI |
VIN, SS/ENA, FSEL |
−0.3 V to 7 V |
| RT |
−0.3 V to 6 V |
| VSENSE |
−0.3 V to 4 V |
| BOOT |
−0.3 V to 17 V |
Output voltage range V
range, VO |
VBIAS, PWRGD |
−0.3 V to 7 V |
| PH |
−0.6 V to 10 V |
Source current I
current, IO |
PH |
Internally Limited |
| VBIAS |
6 mA |
Sink current I
current, IS |
PH |
12 A |
| SS/ENA, PWRGD |
10 mA |
| Voltage differential |
AGND to PGND |
±0.3 V |
| Continuous power dissipation |
See Power Dissipation Rating Table |
| Operating virtual junction temperature range, TJ |
−40°C to 125°C |
| Storage temperature, Tstg |
−65°C to 150°C |
| Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds |
300°C |
DescriptionThe SWIFT™ family of dc/dc regulators, the TPS54611,TPS54612, TPS54613, TPS54614, TPS54615 and TPS54616 low-input voltage high-output current synchronous-buck PWM converters integrate all required active components. Included on the substrate are true, high-performance, voltage error amplifiers, TPS54611,TPS54612, TPS54613, TPS54614, TPS54615 and TPS54616 provide high performance under transient conditions; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
The TPS54611−6 devices are available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package,which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
TPS54616 Data Sheet
