TS3L100D

Crosstalk :
Switch Voltage (Max) :
Mounting Style : SMD/SMT
Number of Switches : Quad
Operating Supply Voltage : 3.3 V
Switch Configuration : SPDT
Package / Case : SOIC-16
Maximum Operating Temperature : + 70 C
Bandwidth : 350 MHz
On Resistance (Max) : 15 Ohms
On Time (Max) : 7.5 ns
Off Time (Max) : 3.5 ns


Description

The TS3L100D belongs to TI TS3L100 LAN switch family which is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input and this device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. When E is low, the switch is enabled and the I port is connected to the Y port. When E is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. This device can be used to replace mechanical relays in LAN applications. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor; the minimum value of the resistor of the TS3L100D is determined by the current-sinking capability of the driver.

The features of TS3L100D can be summarized as (1)wide bandwidth (BW = 350 MHz Min); (2)low differential crosstalk (XTALK = -68 dB Typ); (3)low power consumption (ICC = 10A Max); (4)bidirectional data flow, with near-zero propagation delay; (5)low ON-state resistance (ron = 5Typ); (6)rail-to-rail switching on data I/O ports (0 to VCC); (7)VCC operating range from 3 V to 3.6 V; (8)Ioff supports partial-power-down mode operation; (9)data and control inputs have undershoot clamp diodes; (10)latch-up performance exceeds 100 mA Per JESD 78, Class II; (11)ESD performance tested per JESD 22 -2000-V human-body model (A114-B, class II) -1000-V charged-device model (C101); (12)suitable for both 10 base-T/100 base-T signaling; (13).

The absolute maximum ratings of TS3L100D are (1)supply voltage range, VCC: -0.5 V to 4.6 V; (2)control input voltage range, VIN (see Notes 1 and 2): -0.5 V to 4.6 V; (3)switch I/O voltage range, VI/O (see Notes 1, 2, and 3): -0.5 V to 4.6 V; (4)control input clamp current, IIK (VIN < 0): -50 mA; (5)I/O port clamp current, II/OK (VI/O < 0): -50 mA; (6)ON-state switch current, II/O (see Note 4): ±128 mA; (7)continuous current through VCC or GND terminals: ±100 mA; (8)package thermal impedance, JA (see Note 5): D package: 73°C/W, DB package: 82°C/W, DBQ package: 90°C/W, PW package: 108°C/W; (9)storage temperature range, Tstg: -65°C to 150°C(NOTES: 1. All voltages are with respect to ground, unless otherwise specified. 2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. VI and VO are used to denote specific conditions for VI/O. 4. II and IO are used to denote specific conditions for II/O. 5. The package thermal impedance is calculated in accordance with JESD 51-7.).

Parameters:

Technical/Catalog Information	TS3L100D
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Type	Ethernet Switch
Voltage Supply Source	Single Supply
Voltage - Supply, Single/Dual (±)	3 V ~ 3.6 V
Circuit	4 x SPDT
On-State Resistance	15 Ohm
Mounting Type	Surface Mount
Package / Case	16-SOIC
Packaging	Tube
Current - Supply	0.7mA
Operating Temperature	0°C ~ 70°C
Function	Ethernet Switch
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TS3L100D TS3L100D