TSV914

Features:

` Rail-to-rail input and output
` Wide bandwidth
` Low power consumption: 1.1mA max.
` Unity gain stability
` High output current: 35mA
` Operating from 2.5V to 5.5V
` Low input bias current
` ESD Internal protection 5kV
` Latch-up immunity



Application

·Battery-powered applications
·Portable devices
·Signal conditioning
·Active filtering
·Medical instrumentation



Pinout




Specifications

Symbol	Parameter	Value	Unit
VCC	Supply voltage(1)	6	V
Vid	Differential input voltage (2)	±VCC	V
Vin	Input voltage (3)	VDD-0.2 to VCC+0.2	V
Tstg	Storage temperature	-65 to +150
Rthja	Thermal resistance junction to ambient(4) (5)	-	/W
	SOT23-5	250
	SO-8	125
	MiniSO-8	190
	SO-14	103
	TSSOP14	100
Rthjc	Thermal resistance junction to case	-	/W
	SOT23-5	81
	SO-8	40
	MiniSO8	39
	SO14	31
	TSSOP14	32
Tj	Maximum junction temperature	150
ESD	HBM: human body model(6)	5	kV
	MM: machine model(7)	300	V
	CDM: charged device model(8)	1.5	kV
	Latch-up immunity	200	mA

1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. Vcc-Vin must not exceed 6V.
4. Short-circuits can cause excessive heating and destructive dissipation.
5. Rth are typical values.
6. Human body model: 100pF discharged through a 1.5k resistor between two pins of the device, done
    for all couples of pin combinations with other pins floating.
7. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two
    pins of the device with no external series resistor (internal resistor < 5), done for all couples of pin
    combinations with other pins floating.
8. Charge device model: all pins plus package are charged together to the specified voltage and then
    discharged directly to the ground.


Description

The TSV914 family of single, dual & quad operational amplifiers offers low voltage operation and rail-to-rail input and output.

This family features an excellent speed/power consumption ratio, offering an 8MHz gainbandwidth product while consuming only 1.1mA max at 5V supply voltage. These op-amps are unity gain stable for capacitive loads up to 200pF. They also feature an ultra-low input bias current.

These characteristics make the TSV914 family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.