UC495AC

This entire series of PWM modulators UC495AC each provide a complete pulse width modulation system in a single monolithic integrated circuit. These devices include a 5V reference accurate to ±1%, two independent amplifiers usable for both voltage and current sensing, an externally synchronizable oscillator with its linear ramp generator, and two uncommitted transistor output switches. These UC495AC two outputs may be operated either in parallel for singleended operation or alternating for push-pull applications with an externally controlled dead-band. These units UC495AC are internally protected against doublepulsing of a single output or from extraneous output signals when the input supply voltage is below minimum.

The UC495AC contains an on-chip 39V zener diode for high-voltage applications where VCC would be greater than 40V, and a buffered output steering control that overrides the internal control of the pulse steering flip-flop.

The UC495AC is packaged in a 16-pin DIP, while the UC495A is packaged in an 18 pin DIP. The UC494A, UC495A are specified for operation over the full military temperature range of -55°C to +125°C, while the UC494AC, UC495AC are designed for industrial applications from 0°C to +70°C.