Position: Home  > All Categories> Integrated Circuits (ICs) > UD200

UD200

Features: ` Expert application:Installed only by trained and approvedspecialist contractors.` Fast application/rapid access:Can be applied to 6-day-old concreteor 2 day old polymer screeds. Short curing time and 8 hours access to foot traffic; 20 hours for vehicles.` Hygienic/safe:Slip resistant,...

product image

UD200 Picture
See larger image
SeekIC No. : 004536228 Detail

UD200: Features: ` Expert application:Installed only by trained and approvedspecialist contractors.` Fast application/rapid access:Can be applied to 6-day-old concreteor 2 day old polymer screeds. Short c...

UD200 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
UD200
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/28

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Expert application:Installed only by trained and approvedspecialist contractors.
` Fast application/rapid access:Can be applied to 6-day-old concreteor 2 day old polymer screeds.
                                                 Short curing time and 8 hours access to foot traffic; 20 hours for vehicles.
` Hygienic/safe:Slip resistant, non-tainting, nondusting, monolithic (minimum joints), easy to maintain, microbiologically inert.
` Durable/long life:Wide chemical resistance, wear and impact resistant, resists temperatures from -40 to 120 at 9   mm thickness; 25 years of international use.
` Prepacked :Preweighed/ prepacked for immediate use; batch to-batch colour matched for consistency.


Application

Surface Preparation
Concrete shall be clean, structurally sound and free from foreign materials, contaminants, oily products and other debris. Concrete surfaces shall be 'visibly dry' with no standing water. The minimum tensile (pull-off) strength shall be 1.5N/mm² and concrete shall have cured for at least 5 days. Concrete substrates shall incorporate a continuous waterproofing membrane. Concrete design shall allow provisions for movement joints, as required. In addition, provision shall be made for induced joints to allow any shrinkage of the concrete to occur along defined planes.

All laitance shall be removed. All imperfections such as holes and cracks shall be repaired and levelled with the mean level of the surface. For repairing surface uneveness, EMACO® concrete repair systems shall be used.

The whole surface shall be enclosed or impact shot blasted, surface planed, ground or high-pressure water jetted. All high spots shall be removed. Surfaces shall be rendered 'visibly dry' by heat or mechanical means. Remove all loose material and dust by vacuum or mechanical means.

Priming
Ucrete UD200 shall be applied to a cured scratch coat of Ucrete MF of 1 mm nominal thickness.

Placing
Ucrete UD200 shall be mixed and applied only by specialist flooring contractors who have been trained in the correct application procedures.


Description

Ucrete UD200 is a single layer, seamless, solvent-free, polyurethane flooring system. It has a textured matt finish possessing a wide spectrum of chemical resistance; withstands abrasive wear; has high impact resistance and withstands direct steam impact.


Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Undefined Category
VI-B63-IU
X27 589
Power Supplies - Board Mount
HC-06
PM150RSA060-S81AH0G
Cables, Wires - Management
NM-SF50+
CCK26.5-MM-190-30
Industrial Controls, Meters
SGDM-15ADA
41AA1600E
Programmers, Development Systems
ARDUINO IIC/I2C 液晶模块
JTAG-SMT2
Batteries, Chargers, Holders
ICR18650-28A
ICR18650-26F/h
View more