Purchase UPD6P5, In-stock UPD6P5 From SeekIC.
Part Number: UPD6P5
Description: The PD6P5 is a microcontroller for infrared remote control transmitters which is provided with a one-t...
- Table of contents:
UPD6P5
-
Suppliers
DataSheet
General Description
UPD6P5 General Description
The PD6P5 is a microcontroller for infrared remote control transmitters which is provided with a one-time PROMas the program memory.
Because users can write programs for the PD6P5, it is ideal for program evaluation and small-scale production of the application systems using the PD64A or 65.When reading this document, also refer to the PD64A, 65 Data Sheet (U14380E).
UPD6P5 Maximum Ratings
| Parameter | Symbol | Conditions | MIN. | TYP. | MAX. | Unit |
| High-level input voltage | VIH1 | Other than CLK | 0.7 VDD | VDD | V | |
| VIH2 | CLK | VDD 0.5 | VDD | V | ||
| Low-level input voltage | VIL1 | Other than CLK | 0 | 0.3 VDD | V | |
| VIH2 | CLK | 0 | 0.4 | V | ||
| Input leakage current | ILI | VIN = VIL or VIH | 10 | A | ||
| High-level output voltage | VOH | IOH = 1 mA | VDD 1.0 | V | ||
| Low-level output voltage | VOL | IOL = 1.6 mA | 0.4 | V | ||
| VDD supply current | IDD | 30 | mA | |||
| VPP supply current | IPP | MD0 = VIL, MD1 = VIH | 30 | mA |
UPD6P5 Features
Program memory (one-time PROM): 2,026 * 10 bits
Data memory (RAM) : 32 * 4 bits
Built-in carrier generation circuit for infrared remote control
9-bit programmable timer : 1 channel
Command execution time : 16 s (when operating at fX = 4 MHz: ceramic oscillation)
Stack level : 1 level (Stack RAM is for data memory RF as well.)
I/O pins (KI/O) : 8 units
Input pins (KI) : 4 units
Sense input pin (S0, S2) : 2 units
S1/LED pin (I/O) : 1 unit (In output mode, this is the remote control transmission displaypin.)
Power supply voltage : VDD = 2.2 to 3.6 V
Operating ambient temperature : TA = 40 to +85 °C
Oscillator frequency : fX = 2.4 to 4.8 MHz
POC circuit
Data memory (RAM) : 32 * 4 bits
Built-in carrier generation circuit for infrared remote control
9-bit programmable timer : 1 channel
Command execution time : 16 s (when operating at fX = 4 MHz: ceramic oscillation)
Stack level : 1 level (Stack RAM is for data memory RF as well.)
I/O pins (KI/O) : 8 units
Input pins (KI) : 4 units
Sense input pin (S0, S2) : 2 units
S1/LED pin (I/O) : 1 unit (In output mode, this is the remote control transmission displaypin.)
Power supply voltage : VDD = 2.2 to 3.6 V
Operating ambient temperature : TA = 40 to +85 °C
Oscillator frequency : fX = 2.4 to 4.8 MHz
POC circuit
UPD6P5 Typical Application
Infrared remote control transmitter (for AV and household electric appliances)
UPD6P5
PDF/DataSheet Download
- Datasheet: UPD6P5
- File Size: 238588 KB
- Manufacturer: NEC [NEC]
- Click here to Download
- ·UPD100500D-15
- x1 SRAM
- 101698 KB
- ·UPD100500D-20
- x1 SRAM
- 101698 KB
- ·UPD100504D-15
- x4 SRAM
- 101162 KB
- ·UPD10500D-15
- x1 SRAM
- 108645 KB
- ·UPD10500D-20
- x1 SRAM
- 108645 KB
- ·UPD10504D-15
- x4 SRAM
- 107973 KB
- ·UPD120N
- NEC [NEC]
- THREE-TERMINAL LOW-DROPOUT POSITIVE-VOLTAGE REGULATOR (OUTPUT CURRENT: 0.3 A)
- 161162 KB
- ·UPD120N15T1B
- NEC [NEC]
- THREE-TERMINAL LOW-DROPOUT POSITIVE-VOLTAGE REGULATOR (OUTPUT CURRENT: 0.3 A)
- 161162 KB
UPD6P5 Relative Products
UPD66P04B
The UPD66P04B is a microcontroller for infrared remote control transmitters which is provided with a one-time PROM as the program memory.Because users can write programs for the UPD66P04B, it is ideal for program evaluation and small-scale production of the ...
UPD6600A
The PD6124A and 6600A are 4-bit single-chip microcontrollers for infrared remote controllers for TVs, VCRs, stereos, cassette decks, air conditions, etc. These microcontrollers PD6124A and 6600Aconsist of ROM, RAM, a 4-bit parallel-processing ALU, a program...
UPD65A
Equipped with low-voltage 2.0 V operation, a carrier generation circuit for infrared remote control transmission,a standby release function through key entry, and a programmable timer, the mPD64A and 65 are suitable for infrared remote control transmitters.F...
UPD64A
Equipped with low-voltage 2.0 V operation, a carrier generation circuit for infrared remote control transmission,a standby release function through key entry, and a programmable timer, the mPD64A and 65 are suitable for infrared remote control transmitters.F...
UPD6467GR
The UPD6467GR is a CMOS LSI for on-screen character display, and can be used in combination with a microcomputer to display the tape counter, time, and date in the view finder of a video camera, or the time of a video tape,messages such as dates on pictures,...
UPD6465
The PD6464A,6465 are CMOS LSIs for on-screen character display that control various display systems (such as tape counters) including the program screens of deck-type VCRs and LD players. These LSIs are used in combination with a microcomputer.PD6464A,6465 c...
Hotspot Suppliers Product
CS4340-KSZ
Price: 0.8-1.2 USD
24-Bit, 96 kHz stereo DAC, SOP-16, -0.3 6.0 V, ±10 mA
ICL8038CCPD
Price: 0.89-2.3 USD
Precision Waveform Generator, DIP, 1% Low Distortion, 0.1% High Linearity, 0.001Hz to 300kHz
T495X227K016ZTE100
Price: 0.7-1 USD
CAP TANT 220UF 16V 10% 2917 - T495X227K016ZTE100
KFG1G16U2C-AIB6
Price: 1-20 USD
flash memory, 63-FBGA, 3.3V, Synchronous Burst Read, Data Protection Modes
XTR116UA
Price: 1-2 USD
4-20mA, current loop transmitter, SOP8, Power Supply 40V, quiescent current 200μA
FI-WE21P-HFE
Price: 0.38-0.4 USD
connector, 1Amps, 500VACrms, 100 megohms, 400milliohms, friction lock, one-row type
BTS443P
Price: 0.6-1 USD
SWITCH HIGH SIDE POWER TO252-5 - BTS443P
PK70FG120
Price: 18-22 USD
4-5days
TLP250
Price: 0.5-1.5 USD
Transistor Inverter, DIP-8, 20 mA, 5 V, Highest permissible over voltage, 2500Vrms
IXFH26N50Q
Price: 0.7-1.5 USD
Power MOSFET, 500 V, TO-247
2SK2961
Price: 0.22-0.28 USD
Field Effect Transistor, Low drain-source ON resistance, High forward transfer admittance, TO92, 60V
HN2S01FU
Price: 0.01-0.05 USD
Low Voltage, High Speed, Switching Application, SOP, Low reverse current, VF 0.23V
