UPP9401E3

Series: -
Diode Type: PIN - Single
Current - Max: -
Voltage - Peak Reverse (Max): 50V
Packaging: Cut Tape (CT)
Manufacturer: Microsemi Commercial Components Group
Power Dissipation (Max): 2.5W
Package / Case: DO-216AA
Supplier Device Package: Powermite 1 (DO216-AA)
Capacitance @ Vr, F: 1pF @ 0V, 100MHz
Resistance @ If, F: 1 Ohm @ 50mA, 100MHz


Features:

• High Power Surface Mount Package with very low thermal resistance
• RoHS compliant with e3 suffix part number
• Specified Low Distortion
• Low Bias Current Requirements
• High Zero Bias Impedance
• Full Metallic Bottom Eliminates Flux Entrapment
• Integral Heat Sink/Locking Tabs


Application

• Two-way radio antenna switch
• Low forward bias resistance
• High zero bias resistance
• Low loss high isolation for wide bandwidth performance
• Small size DO-216 package
• Compatible with Automatic insertion Equipment
• Very Low Inductance and Capacitance


Specifications

• Maximum Reverse Voltage:................ 50 Volts
• Average Power Dissipation @ T_TAB1 =75^oC: ......2.5 Watts
(When mounted on a PC board with 2 oz copper.)
• Thermal Resistance Junction to case (bottom):...... 10^oC/W
• Operating and Storage Temperature: ......-55oC to +150^oC
• Solder Temperatures:......... 260 ^o C for 10 s (maximum)


Description

This Microsemi Powermite PIN diode is perfect for two-way radio antenna switch applications where size and power handling capability are critical with its high isolation, low loss and low distortion characteristics. Its advantages also include the low forward-bias resistance and high zero-bias impedance that are essential for low loss, high isolation and wide bandwidth antenna switch performance. It is an ideal selection for applications requiring low profile and high-density mounting and is also available as RoHS Compliant with an e3 suffix. The Powermite package provides a full-metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and its unique locking tab acts as an efficient heat path to the mounting surface. Its innovative design makes this device ideal for use with automatic insertion equipment.