V112CA60

Surge Energy Rating :
Operating Temperature Range : - 55 C to + 85 C
Packaging : Bulk
Mounting : SMD/SMT
Product : MOV
Peak Surge Current : 70 KA
Capacitance : 2200 pF
Diameter : 60 mm
Voltage Rating DC : 1.1 KV
Voltage Rating AC : 1.1 KV
Clamping Voltage : 2.94 KV


Features:

• Provided In Disc Form For Unique Packaging By Customer
• Solderable Electrode Finish Options
• Pressure Contacts and/or Disc Stacking May be Utilized
• Standard Disc Sizes 32mm, 40mm, and 60mm Diameter
• Available Edge Passivation Insulation
• Wide Operating Voltage Range V_M(AC)RMS 250V to 2800V
• High Peak Pulse Current Range . . . . . . . . . . I_TM 20,000A to 70,000A
• Very High Energy Capability W_TM . . . . . . . . . . . . . . .330J to 10,000J
• No Derating Up to 85oC Ambient


Specifications

Continuous:
Steady State Applied Voltage:                                                                                     CA SERIES            UNITS
AC Voltage Range (_VM(AC)RMS) . . . . . . . . . .................................................................250 to 2800                V
DC Voltage Range (V_M(DC)) . . . . . . . . . . . . . . ...............................................................330 to 3500             V
Transient:
Peak Pulse Current (I_TM)
For 8/20µs Current Wave (See Figure 2). . .. . . . . . . . . . . . . . . ..................................20,000  to 70,000       A
Single Pulse Energy Range
For 10/1000µs Current Wave (W_TM) . . . . . . . . . . . ......................................................... 330 to 10,000      J
Operating Ambient Temperature Range (T_A) . . . . . . . . . . . . . ...........................................55 to85                
Storage Temperature Range (T_STG) . . . . . . . . . . ..............................................................55 to85                
Temperature Coefficient (V) of Clamping Voltage (V_C) at Specified Test Current . . . . . .. . <0.01            %

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the
device. This is a stress only rating and operation of the device at these or any other conditions above
those indicated in the operational sections of this specification is not implied.

Description

The V112CA60 Series of transient surge suppressors are industrial high-energy disc varistors (MOVs) intended for special applications requiring unique electrical contact or packaging methods provided by the customer. The electrode finish of these devices is solderable and can also be used with pressure contacts. Discs of the same diameter may be stacked.

ThE V112CA60 series of industrial disc varistors are available in three diameter sizes of 32, 40, and 60mm, with disc thicknesses ranging from 1.8mm minimum to 32mm maximum. They offer a wide voltage range of from 250 to 2800 V_M(AC)RMS .

For information on soldering considerations, refer to V112CA60 update. "Recommendations for Soldering Terminal Leads to MOV Varistor Discs".

Parameters:

Technical/Catalog Information	V112CA60
Vendor	Littelfuse Inc
Category	Circuit Protection
Maximum AC Volts	1100VAC
Maximum DC Volts	1400VDC
Current-Surge	70kA
Package / Case	Disc 60mm
Varistor Voltage	1800V (1.8kV)
Energy	3800J
Number of Circuits	1 - Single
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	V112CA60 V112CA60