Position: Home  > All Categories> Integrated Circuits (ICs) > W541C240

W541C240

Features: • Operating voltage: 2.4V to 5.5V (LCD drive voltage: 3.0V or 4.5V)• Crystal/RC oscillation circuit selectable by code option for system clock• Crystal oscillator: 32.768 KHz only• RC oscillator: 1 MHz (maximum)− High-frequency (400 KHz to 1 MHz) or low-freq...

product image

W541C240 Picture
See larger image
SeekIC No. : 004544823 Detail

W541C240: Features: • Operating voltage: 2.4V to 5.5V (LCD drive voltage: 3.0V or 4.5V)• Crystal/RC oscillation circuit selectable by code option for system clock• Crystal oscillator: 32.768...

W541C240 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
W541C240
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/26

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Operating voltage: 2.4V to 5.5V (LCD drive voltage: 3.0V or 4.5V)
• Crystal/RC oscillation circuit selectable by code option for system clock
• Crystal oscillator: 32.768 KHz only
• RC oscillator: 1 MHz (maximum)
− High-frequency (400 KHz to 1 MHz) or low-frequency (below 400 KHz) oscillation option must be determined by the code option.
− In RC mode, attention must be paid to the high/low frequency oscillation option, because the LCD driver frequency is related to this option.
• Memory
− 2048 × 16 bit program ROM (shared with 2K × 4 bit look-up table)
− 64 × 4 bit data RAM (shared with 16 working registers)
− 24 × 4 LCD data RAM
• 13 input/output pins
− Ports for input only: 1 port/4 pins
− Input/output ports: 2 ports/8 pins
− MFP output pin: 1 pin (MFP)
− Do not be floating when it is as input or output open-drain (NMOS type).
• Power-down mode
− Hold function: no operation (except for oscillator)
− Stop function: no operation (including oscillator)
• Three types of interrupts
− Two internal interrupts (Divider 0, Timer 1)
− One external interrupts (Port RC)
• LCD driver output
− 24 segment × 4 common
− Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 or 1/3 bias), 1/4 duty (1/3 bias) driving mode can be selected
• MFP output pin
− Output is software selectable as modulating or nonmodulating frequency
− Works as frequency output specified by Timer 1
• Built-in 14-bit clock frequency divider circuit
• One built-in 8-bit programmable countdown timers
− Timer 1: Offers auto-reload function and one of two internal clock frequencies (FOSC or FOSC/64) can be selected (output through MFP pin)
• Built-in 18/14-bit watchdog timer selectable for system reset
• Powerful instruction set: 100 instructions
• 8-level subroutine (include interrupt) nesting
• Up to 4 µS instruction cycle (with 1 MHz operating frequency)
• Chip On Board available / Packaged in 64-pin QFP


Pinout

Connection Diagram


Specifications

PARAMETER RATING UNIT
Supply Voltage to Ground Potential -0.3 to +7.0 V
Applied Input/Output Voltage -0.3 to +7.0 V
Power Dissipation 120 mW
Ambient Operating Temperature 0 to +70
Storage Temperature -55 to +150
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability of the device.


Description

The W541C240 is a high-performance 4-bit microcontroller (µC) that provides an LCD driver.. The device contains a 4-bit ALU, a 8-bit timers, a divider, a 24 × 4 LCD driver, and three 4-bit I/O ports. There are also three interrupt sources and 8-level subroutine nesting for interrupt applications. The W541C240 operates on low voltage and very low current and has two power reduction modes, hold mode and stop mode, which help to minimize power dissipation. The W541C240 is suitable for caculators, simple watches and clocks, multiple I/O products, keyboard controllers, speech synthesis LSI controllers, and other products.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Batteries, Chargers, Holders
ICR18650-28A
ICR18650-26F/h
Optical Inspection Equipment
AA924
A21K4B
Audio Products
HUC1002
WM-64CT
Inductors, Coils, Chokes
DR127-330-R
SD53-100-R
Motors, Solenoids, Driver Boards/Modules
IHSS57-36-20
ASD-B2-1521-B
Cables, Wires
821-0814-a
415-0100-150
View more