X4283

Features: • Selectable watchdog timer• Low VCC detection and reset assertion-Four standard reset threshold voltages -Adjust low VCC reset threshold voltage using special programming sequence -Reset signal valid to VCC = 1V• Low power CMOS -<20A max standby current, watchdog on...

product image

X4283 Picture
SeekIC No. : 004547311 Detail

X4283: Features: • Selectable watchdog timer• Low VCC detection and reset assertion-Four standard reset threshold voltages -Adjust low VCC reset threshold voltage using special programming sequ...

floor Price/Ceiling Price

Part Number:
X4283
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Selectable watchdog timer
• Low VCC detection and reset assertion
   -Four standard reset threshold voltages
   -Adjust low VCC reset threshold voltage using special programming sequence
   -Reset signal valid to VCC = 1V
• Low power CMOS
   -<20A max standby current, watchdog on
   -<1A standby current, watchdog OFF
   -3mA active current
• 128Kbits of EEPROM
   -64 byte page write mode
   -Self-timed write cycle
   -5ms write cycle time (typical)
• Built-in inadvertent write protection
   -Power-up/power-down protection circuitry
   -Protect 0, 1/4, 1/2, all or 64, 128, 256 or 512 bytes of EEPROM array with programmable Block Lock™ protection
• 400kHz 2-wire interface
• 2.7V to 5.5V power supply operation
• Available packages
   -8-lead SOIC
   -8-lead TSSOP



Pinout

  Connection Diagram


Specifications

Temperature under bias ................... -65°C to +135°C
Storage temperature ........................ -65°C to +150°C
Voltage on any pin with
      respect to VSS ...................................... -1.0V to +7V
D.C. output current ...................................................5mA
Lead temperature (soldering, 10 seconds).......... 300°C



Description

The X4163/5 combines four popular functions, Poweron Reset Control, Watchdog Timer, Supply Voltage Supervision, and Serial EEPROM Memory in one package.This combination lowers system cost, reduces board space requirements, and increases reliability.

Applying power to the X4283  activates the power on reset circuit which holds RESET/RESET active for a period of time. This allows the power supply and oscillator to stabilize before the processor can execute code.

The Watchdog Timer provides an independent protection mechanism for microcontrollers. When the microcontroller fails to restart a timer within a selectable time out interval, the device activates the RESET/RESET signal. The user selects the interval from three preset values. Once selected, the interval does not change, even after cycling the power.

The X4283 's low VCC detection circuitry protects the user's system from low voltage conditions, resetting the system when VCC falls below the set minimum VCC trip point. RESET/RESET is asserted until VCC returns to proper operating level and stabilizes. Four industry standard VTRIP thresholds are available, however, Intersil's unique circuits allow the threshold to be reprogrammed to meet custom requirements or to fine-tune the threshold for applications requiring higher precision.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Inductors, Coils, Chokes
Isolators
LED Products
Fans, Thermal Management
Test Equipment
View more