X9313WPIZ

Resistance (Ohms): 10k
Number of Circuits: 1
Memory Type: Non-Volatile
Packaging: Tube
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-PDIP
Operating Temperature: -40°C ~ 85°C
Taps: 32
Series: XDCP™
Manufacturer: Intersil
Interface: 3-Wire Serial (Chip Select, Increment, Up/Down)
Temperature Coefficient: ±300 ppm/°C Typical
Voltage - Supply: 4.5 V ~ 5.5 V


Pinout




Description

The Intersil X9313WPIZ is a digitally controlled potentiometer (XDCP). The X9313WPIZ consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface.The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs.The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including:(1)control;(2)parameter adjustments;(3)signal processing.

Features of the X9313WPIZ are:(1)solid-state potentiometer;(2)3-wire serial interface;(3)32 wiper tap points;(4)31 resistive elements;(5)low power CMOS;(6)high reliability;(7)RTOTAL values = 1k, 10k, 50k;(8)packages is 8 Ld SOIC,8 Ld MSOP and 8 Ld PDIP;(9)Pb-free plus anneal available (RoHS compliant).

The absolute maximum ratings of the X9313WPIZ can be summarized as:(1):the temperature under bias is -65 to +135;(2):the storage temperature is -65 to +150;(3):the voltage on CS, INC, U/D, and VCC with respect to VSS is -1V to +7V;(4):the voltage on VH, VL, VW with respect to VSS is -6V to +7V;(5):the V = |VH - VL| is 10V;(6):the lead temperature (soldering 10s)  is +300;(7):the IW (10s) is ±8.8mA;(8):the ESD rating human body model (Per MIL-STD-883 Method 3015.7) is 2.0kV;(9):ESD rating machine model (Per EIAJ ED-4701 Method C-111) is 200V.

Parameters:

Technical/Catalog Information	X9313WPIZ
Vendor	Intersil
Category	Integrated Circuits (ICs)
Number of Circuits	1 - Single
Resistance In Ohms	10K
Interface	Up/Down (3-Wire)
Taps	32
Package / Case	8-DIP (300 mil)
Packaging	Tube
Voltage - Supply	4.5 V ~ 5.5 V
Memory Type	Non-Volatile
Temperature Coefficient	300 ppm/°C Typical
Operating Temperature	-40°C ~ 85°C
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	X9313WPIZ X9313WPIZ