Features: Oscillation Frequency : C2xA series 8MHz ~ 70MHz (Fundamental) :C2xB series 16MHz ~ 120MHz (Fundamental)Divider Ratio : Selectable from f0/1, f0/2, f0/4, f0/8Output : 3-StateOperating Voltage Range : 1.5V ~ 3.6V (C21B series: 1.8V ~ 3.6V)Low Current Consumption : Stand-by function includ...
XC2165: Features: Oscillation Frequency : C2xA series 8MHz ~ 70MHz (Fundamental) :C2xB series 16MHz ~ 120MHz (Fundamental)Divider Ratio : Selectable from f0/1, f0/2, f0/4, f0/8Output : 3-StateOperating Volt...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

|
PARAMETER |
SYMBOL |
RATINGS |
UNITS |
| Supply Voltage |
VDD |
VSS 0.3 to VSS + 7.0 |
V |
| / INH Pin Voltage |
VINH |
VSS 0.3 to VDD + 0.3 |
V |
| Q0 Pin Voltage |
VQ0 |
VSS 0.3 to VDD + 0.3 |
V |
| Q0 Output Current |
IQ0 |
± 50 |
mA |
| Power Dissipation |
Pd |
150 * |
mW |
| Operating Temperature Range |
Topr |
- 40 to + 85 |
|
| Storage Temperature Range |
Tstg |
- 65 to + 150 (chip form) |
|
|
- 55 to + 125 (SOT-26) |
The XC2165 series are CMOS ICs operates from supply voltage range from 1.5V to 3.6V with built-in crystal oscillator and divider circuits.Output is selectable from any one of the following values for f0 : f0/1, f0/2, f0/4, f0/8.
With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only an external crystal.In stand-by mode, oscillation stops completely and output pin Q0 becomes in the state of high impedance.The XC2165 series are integrated into SOT-26 packages.
The XC2165 series is also available in chip form.