XRD5410

VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . .-0.3V, +7V
Digital Input Voltage to GND . . . . . .-0.3V, VDD +0.3V
VREFIN . . . . . . . . . . . . . . . . . . . . . . . .-0.3V, VDD +0.3V
VOUT¹ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDD, GND
Continuous Current, Any Pin . . . . . . . . -20mA, +20mA
Package Power Dissipation Ratings (T_A= +70)
PDIP (derate 9mW/above +70) . . . 117mW
SOIC (derate 6mW/ above +70) . . .155mW
Operating Temperature Range . . . . . -40 to + 85
Storage Temperature Range . . . . . . -65 to +165
Lead Temperature (soldering, 10 sec) . . . . . . +300
Notes
1 Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation at or above this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
2 Any input pin which can see a value outside the absolute maximum ratings should be protected by Schottky diode clamps (HP5082-2835) from input pin to the supplies. All inputs have protection diodes which will protect the device from short transients outside the supplies of less than 100mA for less than 100ms.

The XRD5410 are low power, voltage output digital-to-analog converters (DAC) for +3V power supply operation. The parts draw only 70mA of quiescent current and are available in both an 8-lead PDIP and SOIC package.

The XRD5410 have a 3 wire serial port with an output allowing the user to daisy chain several of them together. The serial port will support both Microwiret, SPIt, and QSPIt standards.

The outputs of the XRD5410 are set at a gain of +2. The output short circuit current is 7mA typical.