Features: • 575 MHz to 675 MHz operating range• Low Output Jitter: 9ps rms typical at 622 MHz• On Chip Crystal Oscillator Circuit• Optimized for 15 to 40 MHz crystals• Uses parallel fundamental mode crystal• Selectable 8x, 16x or 32x multiplier• Selectable...
XRT8020: Features: • 575 MHz to 675 MHz operating range• Low Output Jitter: 9ps rms typical at 622 MHz• On Chip Crystal Oscillator Circuit• Optimized for 15 to 40 MHz crystals• ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Specifications | |
Mult Ratio | 8, 16, 32 |
Pwr Sup | 3.3V |
Pkgs | QFN-16 |
Jitter
Jitter is an important consideration with any clock. Different systems will have different requirements for jitter. The XRT8020 is capable of attaining 10 pS of jitter at 624 MHz. Jitter levels this low allow the device to be designed into many high-speed clock circuits where tolerance for high jitter levels eliminates other solutions.
Power
The XRT8020 IC operates from 3.3V and comes in a low inductance package that is available over the industrial temperature range. Also, the part has auto VCO (Voltage Controlled Crystal Oscillator) calibration logic on power-up that provides stability over wide frequency ranges.
Reduced Package Size
At 16-pin QLP, the XRT8020 is one of the smallest clock synthesizers in the market. This capability makes it ideal for both OEMs, and hybrid manufacturers that combine timing components onto a single PC-board module offering pre-tested off-the-shelf timing solutions.
The XRT8020 is a monolithic analog phase locked loop that provides a high frequency LVDS clock output, using a low frequency crystal or reference clock. It is designed for SONET/SDH and other low jitter applications.
The high performance of the XRT8020 IC provides a very low jitter LVDS clock output up to 650 MHz, while operating at 3.3 volts. The XRT8020 has a selectable 8x, 16x or 32x internal multiplier for an external crystal or signal source. The Output Enable pin provides a true disconnect for the LVDS output. The very compact (4 x 4 mm) low inductance package is ideal for high frequency operation.