XRT83L314

Features: • Fully integrated 14-Channel short haul and long aul transceivers for T1/J1 (1.544MHz) and E1 2.048MHz) applications.• T1/E1/J1 short haul, long haul, and clock rate are er port selectable through software without hanging components.• Internal Impedance matching on bot...

product image

XRT83L314 Picture
SeekIC No. : 004549497 Detail

XRT83L314: Features: • Fully integrated 14-Channel short haul and long aul transceivers for T1/J1 (1.544MHz) and E1 2.048MHz) applications.• T1/E1/J1 short haul, long haul, and clock rate are er po...

floor Price/Ceiling Price

Part Number:
XRT83L314
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/25

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Fully integrated 14-Channel short haul and long aul transceivers for T1/J1 (1.544MHz) and E1 2.048MHz) applications.
• T1/E1/J1 short haul, long haul, and clock rate are er port selectable through software without hanging components.
• Internal Impedance matching on both receive and ransmit for 75 (E1), 100 (T1), 110 (J1), and 20 (E1) applications are per port selectable hrough software without changing components.
• Power down on a per channel basis with ndependent receive and transmit selection.
• Five pre-programmed transmit pulse settings for T1 hort haul applications, as well as an arbitrary rogrammable waveform generator for custom ransmit pulse shaping per channel.
• Arbitrary pulse generator for T1 short haul and T1 ong haul modes per channel.
• Transmit line build outs (LBO) for T1 long haul pplications from 0dB to -22.5dB in three -7.5dB teps on a per channel basis.
• On-Chip transmit short-circuit protection and imiting protects line drivers from damage on a per hannel basis.
• Independent Crystal-Less digital jitter attenuators JA) with 32-Bit or 64-Bit FIFO for the receive and ransmit paths
• On-Chip frequency multiplier generates T1 or E1 aster clocks from a variety of external clock ources (8, 16, 56, 64, 128, 256kHz and 1X, 2X, X, 8X T1 or E1)
• Driver failure monitor output (DMO) alerts of ossible system or external component problems.
• Transmit outputs and receive inputs may be "High" mpedance for protection or redundancy pplications on a per channel basis.
• Support for automatic protection switching.
• 1:1 and 1+1 protection without relays.
• Selectable receiver sensitivity from 0 to 36dB cable oss in T1 @ 772kHz, and 0 to 43dB cable loss in 1 @ 1,024kHz.
• Receive monitor mode handles 0 to 29dB resistive ttenuation (flat loss) along with 0 to 6dB cable loss or both T1 and E1.
• Receiver line attenuation indication output in 1dB teps.
• Loss of signal (RLOS) according to ITU-T G.775/ TS300233 (E1) and ANSI T1.403 (T1/J1).
• Programmable receive slicer threshold (45%, 50%, 5%, or 68%) for improved receiver interference mmunity.
• Programmable data stream muting upon RLOS etection.
• On-Chip HDB3/B8ZS encoder/decoder with an nternal 16-bit LCV counter for each channel.
• On-Chip digital clock recovery circuit for high input itter tolerance.
• QRSS pattern generator and detection for testing nd monitoring.
• Error and bipolar violation insertion and detection.
• Transmit all ones (TAOS) and in-band network loop p and loop down code generation.
• Automatic loop code detection for remote loopback ctivation.
• Supports local analog, remote, digital, and dual oopback modes.
• Low Power dissipation: 170mW per channel (50% ensity).
• 250mW per channel maximum power dissipation 100% density).
• Single 3.3V supply operation (3V to 5V I/O olerant).
• 304-Pin TBGA package
• -40 to +85 Temperature Range
• Supports gapped clocks for mapper/multiplexer pplications.





Application

• T1 Digital Cross Connects (DSX-1)
• ISDN Primary Rate Interface
• CSU/DSU E1/T1/J1 Interface
• T1/E1/J1 LAN/WAN Routers
• Public Switching Systems and PBX Interfaces
• T1/E1/J1 Multiplexer and Channel Banks
• Integrated Multi-Service Access Platforms (IMAPs)
• Integrated Access Devices (IADs)
• Inverse Multiplexing for ATM (IMA)
• Wireless Base Stations





Specifications

Specifications
No. ofCH 14
DataRate(s) T1/E1/J1
Clk Rec Yes
SH/LH S/L
Temp.Range Ind.
OpPwr Sup/Max Cur 3.3V ±5%
Pkgs BGA-304





Description

The XRT83L314 is a fully integrated 14-channel longhaul nd short-haul line interface unit (LIU) that perates from a single 3.3V power supply. Using nternal termination, the LIU provides one bill of aterials to operate in T1, E1, or J1 mode ndependently on a per channel basis with minimum xternal components. The LIU features are rogrammed through a standard microprocessor nterface. EXAR's LIU has patented high impedance ircuits that allow the transmitter outputs and receiver nputs to be high impedance when experiencing a ower failure or when the LIU is powered off. Key esign features within the LIU optimize 1:1 or 1+1 edundancy and non-intrusive monitoring applications o ensure reliability without using relays.

The XRT83L314 on-chip clock synthesizer generates T1/E1/J1 lock rates from a selectable external clock frequency nd has five output clock references that can be used or external timing (8kHz, 1.544Mhz, 2.048Mhz, xT1/J1, nxE1).

Additional features of XRT83L314 include RLOS, a 16-bit LCV ounter for each channel, AIS, QRSS generation/ etection, Network Loop Code generation/detection, AOS, DMO, and diagnostic loopback modes.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Semiconductor Modules
Fans, Thermal Management
Soldering, Desoldering, Rework Products
Tapes, Adhesives
803
RF and RFID
View more