XRT94L33IB

• Provides DS3/ E3 mapping/de-mapping for up to 3 tributaries through SONET STS-1 or SDH AU- 3 and/or TUG-3/AU-4 containers
• Generates and terminates SONET/SDH section, line and path layers
• Integrated SERDES with Clock Recovery Circuit
• Provides SONET frame scrambling and descrambling
• Integrated Clock Synthesizer that generates 155 MHz and 77.76 MHz clock from an external 12.96/19.44/77.76 MHz reference clock
• Integrated 3 E3/DS3/STS-1 De-Synchronizer circuit that de-jitter gapped clock to meet 0.05UIpp jitter requirements
• Access to Line or Section DCC
• Level 2 Performance Monitoring for E3 and DS3
• Supports mixing of STS-1E and DS3 or E3 and DS3 tributaries
• UTOPIA Level 2 interface for ATM or level 2P for Packets
• E3 and DS3 framers for both Transmit and Receive directions
• Complete Transport/Section Overhead Processing and generation per Telcordia and ITU standards
• Single PHY and Multi-PHY operations supported
• Full line APS support for redundancy applications
• Loopback support for both SONET/SDH as well as E3/DS3/STS-1
• Boundary scan capability with JTAG IEEE 1149
• 8-bit microprocessor interface
• 3.3 V ± 5% Power Supply; 5 V input signal tolerance
• -40°C to +85°C Operating Temperature Range
• Available in a 504 Ball TBGA package

The XRT94L33 is a highly integrated SONET/SDH terminator designed for E3/DS3/STS-1 mapping/de-mapping functions from either the STS-3 or STM-1 data stream. The XRT94L33 interfaces directly to the optical transceiver The XRT94L33 processes the section, line and path overhead in the SONET/SDH data stream and also performs ATM and PPP PHY-layer processing. The processing of path overhead bytes within the STS-1s or TUG-3s includes 64 bytes for storing the J1 bytes. Path overhead bytes can be accessed through the microprocessor interface or via serial interface.

The XRT94L33 uses the internal E3/DS3 De- Synchronizer circuit with an internal pointer leak algorithm for clock smoothing as well as to remove the jitter due to mapping and pointer movements.

These XRT94L33  De-Synchronizer circuits do not need any external clock reference for its operation.

The SONET/SDH transmit blocks allow flexible insertion of TOH and POH bytes through both Hardware and Software. Individual POH bytes for the transmitted SONET/SDH signal are mapped either from the XRT94L33 memory map or from external interface. A1, A2 framing pattern, C1 byte and H1, H2 pointer byte are generated.The SONET/SDH receive blocks receive SONET STS-3 signal or SDH STM-1 signal and perform the necessary transport and path overhead processing.

The XRT94L33 provides a line side APS (Automatic Protection Switching) interface by offering redundant receive serial interface to be switched at the frame boundary.

The XRT94L33 provides 3 Mappers for performing STS-1/VC-3 to STS-1/DS3/E3 mapping function,one for each STS-1/DS3/E3 framers. A PRBS test pattern generation and detection is implemented to measure the bit-error performance.A general-purpose microprocessor interface is included for control, configuration and monitoring.