Features: ` EASY-TO-DESIGN INPUT/OUTPUT RANGES: 0mA−20mA, 4mA−20mA, 5mA−25mA AND VOLTAGE OUTPUTS` NONLINEARITY: 0.002%` LOW OFFSET DRIFT: 1V/` ACCURACY: 0.015%` SINGLE-SUPPLY OPERATION` WIDE SUPPLY RANGE: 7V TO 44V` OUTPUT ERROR FLAG (EF)` OUTPUT DISABLE (OD)` ADJUSTABLE VOLTAGE ...
XTR111: Features: ` EASY-TO-DESIGN INPUT/OUTPUT RANGES: 0mA−20mA, 4mA−20mA, 5mA−25mA AND VOLTAGE OUTPUTS` NONLINEARITY: 0.002%` LOW OFFSET DRIFT: 1V/` ACCURACY: 0.015%` SINGLE-SUPPLY OPERA...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Power Supply Voltage, VVSP . . . . . . . . . . . . . . .. . . . . +44V
Voltage at SET(3) . . . . . . . . . . . . . . . . . . . . . −0.5V to +14V
Voltage at IS(3, 5) . . . . . . . .. (VVSP) − 5.5V to (VVSP) + 0.5V
Voltage at REGS, REGF, VIN, OD, EF ..−0.5V to (VVSP) + 0.5V
Voltage at REGF, VG . . . . . . . . . . . . . −0.5V to (VVSP) + 0.5V
Current into any pin(3, 4) . . . . . . . . . . . . . . . . . . . .. ±25mA
Output Short-Circuit Duration(5):
VG . . . . . . . . . . . . . . . . . Continuous to common and VVSP
REGF . . . . . . . . . . . . . . .. Continuous to common and VVSP
Operating Temperature Range . . . . . . . . . .. −55to +125
Storage Temperature Range . . . . . . . . . .. . −65 to +150
Electrostatic Discharge Rating (HBM) . . . . . . . . . . . . . 2000V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not supported.
(2) Refer to the Package Option Addendum at the end of this document for lead temperature ratings.
(3) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails must be current limited.
(4) The IS pin can source up to the output current-limit under normal operating conditions.
(5) See text in Application Section regarding safe voltage ranges and currents.
The XTR111 is a precision voltage-to-current converter designed for the standard 0mA−20mA or 4mA−20mA analog signals, and can source up to 36mA. The ratio between input voltage and output current is set by the single resistor RSET. The circuit can also be modified for voltage output.
An external P-MOSFET transistor ensures high output resistance and a broad compliance voltage range extending from 2V below the supply voltage, VVSP, to voltages well below GND.The adjustable 3V to 15V sub-regulator output provides the supply voltage for additional circuitry.The XTR111 is available in a DFN surface-mount package.