ZLNB2013

Features: • Dual polarization and tone switch• Temperature compensated polarization switches• Reduced cost solution, only 2 external components per channel• Multiplexer IC direct drive• Tone and pol. outputs are TTL, CMOS, pin diode and IF amp capable• Transient...

product image

ZLNB2013 Picture
SeekIC No. : 004551138 Detail

ZLNB2013: Features: • Dual polarization and tone switch• Temperature compensated polarization switches• Reduced cost solution, only 2 external components per channel• Multiplexer IC di...

floor Price/Ceiling Price

Part Number:
ZLNB2013
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Dual polarization and tone switch
• Temperature compensated polarization switches
• Reduced cost solution, only 2 external components per channel
• Multiplexer IC direct drive
• Tone and pol. outputs are TTL, CMOS, pin diode and IF amp capable
• Transient resistant inputs
• Includes receiver-off detector
• User adjustable filter centre frequency and bandwidth
• Low frequency and DiSEqC™ control signals rejection
• Eliminates many close tolerance discrete components
• Wide supply operating range
• Low quiescent current





Application

• Twin Universal LNB's
• Quad Universal LNB's
• Multi Feed Universal LNB's
• LNB switch boxes





Pinout

  Connection Diagram




Specifications

Part Number ZLNB2013
No. of Control Ports 2
Controller Type IC MUX
Ftone (kHz) 22
Vpol (V) 14 to 15.5
Output Ports Type Std & Inv
No Rec Detect Yes
Vcc (V) 39578


Supply voltage .......................-0.6V to 12V
Supply current ...............................500mA
VPOL1 and VPOL2
Input voltage ....................25V Continous
Operating temperature ...........-40 to 80
Storage temperature.............. -40 to 85
.





Description

The ZLNB2013 dual polarization and tone switch controller is one of a wide range of satellite receiver LNB support circuits available from Zetex. It features two completely independent channels, each providing logic outputs to control LNB polarization selection, local oscillator selection and down feed disable. It is intended for use in Twin, Quad and multiple feed Universal LNBs, replacing many discrete components to save both manufacturing cost and PCB size, whilst improving reliability.

The two polarization control inputs of the ZLNB2013 have a threshold voltage of 14.75V to meet the switching requirement of 14.0V to 15.5V. To minimize drift both thresholds are temperature compensated. Each features a low and stable input current that enables threshold trimming and transient protection to be achieved with the addition of only a single resistor per channel.

Multi feed LNBs can be called to operate with one or more of their controlling receivers powered down/disconnected, with attendant cable mismatch problems. To ease design for this situation, each polarization input of the ZLNB2013 has a second threshold set at 9V. An input voltage below this threshold indicates "receiver not present" and switches the relevant control channels high. This logic output can be used to disable the associated down feed driver, eliminating any problems due to cable mismatch.

Universal LNB local oscillator selection is achieved by detection of a low level AC voltage superimposed on the polarization control voltage. To facilitate this function, the ZLNB2013 includes a separate tone detector for each channel. Control of detector bandwidth and sensitivity is provided using an external resistor and capacitor for each channel. The tone detector has been designed to give excellent rejection of low frequency control signals and DiSEqC™ tone bursts.

The ZLNB2013 has been specifically designed to minimize the solution cost whilst being flexible. The ZLNB2013 only requires two external components per channel to give full user control and functionality. The ZLNB2013 also includes complimentary outputs so that it can directly drive many multiplexer ICs without the need of an inverter. Any unused outputs can be left open circuit without any effect to the remaining circuits. Polarization switch and tone detector outputs can directly drive TTL and CMOS logic, pin diodes, IF-amp supply switching and multiplexer ICs.

The ZLNB2013 operates from a single supply which can be anything from 5-8V. Its quiescent current is typically only 9mA and this does not change significantly with load or logic state. It is available in the space saving QSOP16 surface mount package.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Motors, Solenoids, Driver Boards/Modules
Fans, Thermal Management
Computers, Office - Components, Accessories
Crystals and Oscillators
Batteries, Chargers, Holders
Line Protection, Backups
View more