Maximum Forward Diode Voltage
: 1.8 V
Maximum Reverse Diode Voltage
: 5 V
Maximum Power Dissipation
: 45 mW
Maximum Operating Temperature
: + 100 C
Packaging
: Tube
Maximum Input Diode Current
: 25 mA
Minimum Operating Temperature
: - 55 C
Maximum Baud Rate
: 1 Mbps
Package / Case
: PDIP-8
Current Transfer Ratio
: 50 %
Features: . High speed-1 MBit/s
. Superior CMR-10 kV/s
. Dual-Channel HCPL-2530/HCPL-2531
. Double working voltage-480V RMS
. CTR guaranteed 0-70°C
. U.L. recognized (File # E90700)Application. Line receivers
. Pulse transformer replacement
. Output interface to CMOS-LSTTL-TTL
. Wide bandwidth analog couplingSpecifications
|
Parameter |
Symbol |
Value |
Units |
|
Storage Temperature |
TSTG |
-55 to +125 |
°C |
|
Operating Temperature |
TOPR |
-55 to +100 |
°C |
|
Lead Solder Temperature |
TSOL |
260 for 10 sec |
°C |
|
EMITTER |
|
DC/Average Forward Input Current Each Channel (Note 1) |
IF (avg)
|
25 |
mA |
|
Peak Forward Input Current (50% duty cycle, 1 ms P.W.) Each Channel (Note 2)
|
IF (pk)
|
50 |
mA |
|
Peak Transient Input Current - (1 s P.W., 300 pps) Each Channel |
IF (trans) |
1.0 |
A |
|
Reverse Input Voltage Each Channel |
VR |
5 |
V |
|
Input Power Dissipation (6N135/6N136 and HCPL-2503/4502) (HCPL-2530/2531 )
Each Channel (Note 3) |
PD |
100
45 |
mW |
|
DETECTOR |
|
Average Output Current Each Channel |
IO (avg)
|
8 |
mA |
|
Peak Output Current Each Channel |
I O(pk)
|
16 |
mA |
|
Emitter-Base Reverse Voltage (6N135, 6N136 and HCPL-2503 only) |
VEBR |
5 |
V |
|
Supply Voltage |
VCC |
-0.5 to 30 |
V |
|
Output Voltage |
VO |
-0.5 to 20 |
V |
|
Base Current (6N135, 6N136 and HCPL-2503 only) |
IB |
5 |
mA |
|
Output power
dissipation |
(6N135, 6N136, HCPL-2503, HCPL-4502) (Note 4) |
PD |
100 |
mW |
|
(HCPL-2530, HCPL-2531) Each Channel |
35 |
mW |
DescriptionThe HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor.
A separate connection for the bias of the HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor.An internal noise shield provides superior common mode rejec-tion of 10kV/s. An improved package allows superior insulation permitting a 480 V working voltage compared to industry stan-dard of 220 V.
Parameters: | Technical/Catalog Information | HCPL-2530 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Isolation Voltage | 3750Vrms |
| Input Type | DC |
| Output Type | Transistor with Vcc |
| Current - Output/Channel | 8mA |
| Voltage - Output | 20V |
| Vce Saturation (Max) | - |
| Current Transfer Ratio (Min) | 7% @ 16mA |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Packaging | Tube |
| Number of Circuits | 2 - Dual |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 2530
HCPL2530
516 1042 5 ND
51610425ND
516-1042-5
|
HCPL-2530 Data Sheet
