Features: Provides accurate measurement of available charge in NiCd,NiMH, Li-Ion, and lead-acid batteries Supports SBS Smart Battery Data Specification v1.1 Supports the 2-wire SMBus v1.1 interface with PEC or 1-wire HDQ16 Reports individual cell voltages Monitors and provides control to charge an...
bq2060: Features: Provides accurate measurement of available charge in NiCd,NiMH, Li-Ion, and lead-acid batteries Supports SBS Smart Battery Data Specification v1.1 Supports the 2-wire SMBus v1.1 interface ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Minimum | Maximum | Unit | Notes |
VCC-Supply voltage | Relative to VSS | -0.3 | +6.0 | V | |
VIN All other pins | Relative to VSS | -0.3 | +6.0 | V | |
TOPR | Operating temperature |
-20 | +70 | °C | Commercial |
The bq2060 SBS-Compliant Gas Gauge IC for battery pack or in-system installation maintains an accurate record of available charge in rechargeable batteries. The bq2060 monitors capacity and other critical battery parameters for NiCd, NiMH, Li-Ion, and lead-acid chemistries. The bq2060 uses a V-to-F converter with automatic offset error correction for charge and discharge counting. For voltage, temperature, and current reporting, the bq2060 uses an A-to-D converter. The onboard ADC also monitors individual cell voltages in a Li-Ion battery pack and allows it to generate control signals that may be used in conjunction with a pack supervisor to enhance pack safety.
The bq2060 supports the smart battery data (SBData) commands and charge-control functions. It communicates data using the system manage-ment bus (SMBus) 2-wire protocol or the Benchmarq 1-wire HDQ16 protocol. The data available include the battery's remaining capacity, temper-ature, voltage, current, and remaining run-time predictions. The bq2060provides LED drivers and a push-button input to depict remaining battery capacity from full to empty in 20% or 25% increments witha4or 5-segmentdisplay.
The bq2060 works with an external EEPROM. The EEPROM stores the configuration information for the bq2060, such as the battery's chemis-try, self-discharge rate, rate compensation factors, measurement calibration, and design voltage and capacity.The bq2060 uses the programmable self-discharge rate and other compensation factors stored in the EEPROM to accurately adjust remaining capacity for use and standby conditions based on time, rate, and temperature.
The REG output regulates the operating voltage for the bq2060 from the battery cell stack using an external JFET. The bq2060 also automatically cali-brates or learns the true battery capacity in the course of a discharge cycle from near full to near empty levels.