HMMC-1002, HMMC-2007, HMMC-2027 Selling Leads, Datasheet
HMMC-1002, HMMC-2007, HMMC-2027 Datasheet download
Part Number: HMMC-1002
MFG: --
Package Cooled:
D/C:
HMMC-1002, HMMC-2007, HMMC-2027 Datasheet download
MFG: --
Package Cooled:
D/C:
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: HMMC-1002
File Size: 101476 KB
Manufacturer: HP [Agilent(Hewlett-Packard)]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HMMC-2007
File Size: 81402 KB
Manufacturer: HP [Agilent(Hewlett-Packard)]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HMMC-2027
File Size: 79547 KB
Manufacturer: HP [Agilent(Hewlett-Packard)]
Download : Click here to Download
The HMMC-1002 is a monolithic, voltage variable, GaAs IC attenuator that operates from DC to 50ÊGHz. It is fabricated using MWTC's MMICB process which features an MBE epitaxial layer, backside ground vias, and FET gate lengths of approximately 0.4Êmm. The variable resistive elements of the HMMC-1002 are two 750 mm wide series FETs and four 200 mm wide shunt FETs. The distributed topology of the HMMC-1002 minimizes the parasitic effects of its series and shunt FETs, allowing the HMMC-1002 to exhibit a wide dynamic range across its full bandwidth. An on-chip DC reference circuit may be used to maintain optimum VSWR for any attenuation setting or to improve the attenuation versus voltage linearity of the attenuator circuit.
Symbol |
Parameters/Conditions |
Units |
Min. |
Max. |
VDC-RF |
DC Voltage to RF Ports |
V |
-0.6 |
+1.6 |
V1 |
V1 Control Voltage |
V |
-5.0 |
+0.5 |
V2 |
V1 Control Voltage |
V |
-5.0 |
+0.5 |
VDC |
DC In/DC Out |
V |
-0.6 |
+1.0 |
Pin |
RF Input Power |
dBm |
17 | |
Tmina |
Minimum Ambient Operating Temperature |
-55 |
||
Tmaxa |
Maximum Ambient Operating Temperature |
+125 | ||
TSTG |
Storage Temperature |
-65 |
+165 | |
Tmax |
Maximum Assembly Temp. |
+300 |
The HMMC-1002 is designed to be used as a gain control block in an AGC assembly. Because of its wide dynamic range and return loss performance, the HMMC-1002 may also be used as a broadband pulse modulator or single-pole single-throw, nonreflective switch.
The HMMC-2007 is a GaAs monolithic microwave integrated circuit (MMIC) designed for low insertion loss and high isolation from DC to 8 GHz. It is intended for use as a general-purpose, single-pole, double-throw (SPDT), absorptive switch. Two series and two shunt MESFETs per throw provide 1.4 dB maximum insertion loss and 38 dB typical isolation at 6 GHz. HMMC-2007 chips use through-substrate vias to provide ground connections to the chip backside and minimize the number of wire bonds required.
Symbol |
Parameters/Conditions |
Units |
Min. |
Max. |
Vsel |
Select Voltages 1 and 2 |
V |
-10.5 |
+10.5 |
Pin |
RF Input Power |
dBm |
27 | |
Top |
Operating Temperature |
-55 |
+125 | |
TSTG |
Storage Temperature |
-65 |
+165 | |
Tmsx |
Maximum Assembly Temp. (for 60 seconds max.) |
+200 | ||
Punsel |
Power into Unselected Output |
dBm |
27 |
The HMMC-2007 can be used in instrumentation, communications, radar, ECM, EW, and many other systems requiring SPDT switching. It can be used for pulse modulation, port isolation, transfer switching, high-speed switching, replacement of mechanical switches, and so on.
The HMMC-2027 is a GaAs monolithic microwave integrated circuit (MMIC) designed for low insertion loss and high isolation from DC to 26.5 GHz. It is intended for use as a generalpurpose, single-pole, doublethrow (SPDT), absorptive switch. Two series and two shunt MESFETs per throw provide 3 dB maximum insertion loss and 30ÊdB minimum isolation at 26.5ÊGHz. HMMC-2027 chips use through-substrate vias to provide ground connections to the chip backside and minimize the number of wire bonds required.
Symbol |
Parameters/Conditions |
Units |
Min. |
Max. |
Vsel |
Select Voltages 1 and 2 |
V |
-10.5 |
+3 |
Pin |
RF Input Power |
dBm |
25 | |
Top |
Operating Temperature |
-55 |
+125 | |
TSTG |
Storage Temperature |
-65 |
+165 | |
Tmsx |
Maximum Assembly Temp. |
+200 | ||
Punsel[2] |
Power into Unselected Output |
dBm |
15 |
The HMMC-2027 can be used in instrumentation, communications, radar, ECM, EW, and many other systems requiring SPDT switching. It can be used for pulse modulation, port isolation, transfer switching, high-speed switching, replacement of mechanical switches, and so on.