Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPS51117 is a cost effective, synchronous buck controller for POL voltage regulation in notebook PC applications. The controller is dedicated for Adaptive On-Time D-CAP™ Mode operation that provides ease of use, low external component count, and excellent fast transient response at the same time.
Auto-skip mode for high efficiency down to the milli-ampere load range, or PWM-only mode for low noise operation is selectable.
The current sensing scheme for positive overcurrent and negative overcurrent protection is loss-less low-side RDS(on) sensing plus temperature compensation. The device receives 5-V (4.5 V to 5.5 V) supply from another regulator such as the TPS51120 or TPS51020 in the NBPC system. The conversion input can be either VBAT or 5-V rail,ranging from 1.8 V to 28 V, and the output voltage range is from 0.75 V to 5.5 V.
The TPS51117 is available in the 14-pin TSSOP package and is specified from 40°C to 85°C.
The above info is from (www.seekic.com)
TPS51117 Maximum Ratings
VALUE
UNIT
Input voltage range
VBST
0.3 to 36
V
VBST (with respect to LL)
0.3 to 6
EN_PSV, TRIP, V5DRV, V5FILT
0.3 to 6
VOUT
0.3 to 6
TON
0.3 to 6
Output voltage range
DRVH
1 to 36
V
DRVH (with respect to LL)
0.3 to 6
LL
1 to 30
PGOOD, DRVL
0.3 to 6
PGND
0.3 to 0.3
TA Operating free-air temperature
40 to 85
Tstg Storage temperature range
55 to 150
TJ Junction temperature range
40 to 125
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
260
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under ecommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device eliability.
Edited by (www.seekic.com) ,the biggest IC PDF and datasheet download site.
TPS51117 Features
· High Efficiency, Low Power Consumption,4.5-mA Typical Shutdown Current · Fixed Frequency Emulated On-Time Control,Adjustable from 100 kHz to 550 kHz · Fast Transient Response · < 1% Initial Reference Accuracy · Output Voltage Range: 0.75 V to 5.5 V · Wide Input Voltage Range: 1.8 V to 28 V · Selectable Auto-Skip/PWM-Only Operation · Temperature Compensated (4500 ppm/°C) Low-Side RDS(on) Overcurrent Sensing · Negative Overcurrent Limit · Integrated Boost Diode · Integrated OVP/UVP and Thermal Shutdown · Power-Good Signal · Internal 1.2-ms Voltage Softstart · Output Discharge (Softstop)
The above info is from (www.seekic.com)
TPS51117 Typical Application
· Notebook Computers · I/O Supplies · System Power Supplies