© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:500000 D/C:SOT113 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The TF1208 is designed as one kind of IGBT gate driver device that is designed for use with TOSHIBA insulated gate bipolar transistor module and this device includes the optical isolator and IGBT gate driver circuit. Usi...
Vendor:Other Category:Other
The TF1207 is designed as one kind of IGBT gate driver device that is designed for use with TOSHIBA insulated gate bipolar transistor module and this device includes the optical isolator and IGBT gate driver circuit. Usi...
Vendor:Other Category:Other
The TF1206 is designed as one kind of IGBT gate driver device that is designed for use with TOSHIBA insulated gate bipolar transistor module and this device includes the optical isolator and IGBT gate driver circuit. Usi...
Vendor:Other Category:Other
The TF1205 is designed as one kind of IGBT gate driver device that is designed for use with TOSHIBA insulated gate bipolar transistor module and this device includes the optical isolator and IGBT gate driver circuit. Usi...
Vendor:Other Category:Other
The TF1204 is designed as one kind of GTR gate driver device that is designed for use with TOSHIBA giant transistor module and this device includes the optical isolator and GTR gate driver circuit. Using this driver, you...
Vendor:Other Category:Other
The TF1203 is designed as one kind of GTR gate driver device that is designed for use with TOSHIBA giant transistor module and this device includes the optical isolator and GTR gate driver circuit. Using this driver, you...
Vendor:Other Category:Other
The TF1202 is designed as one kind of GTR gate driver device that is designed for use with TOSHIBA giant transistor module and this device includes the optical isolator and GTR gate driver circuit. Using this driver, you...
Vendor:Other Category:Other
The TF1109 is designed as one kind of DC 24 V line controlled I/O interface module and it includes the optical isolator. Using this module, you can design high reliability and compact system.
Features of the TF1202 are:...
Vendor:Other Category:Other
The TF1108 is designed as one kind of AC 100 V line controlled I/O interface module and it includes the optical isolator. Using this module, you can design high reliability and compact system.
Features of the TF1108 are...
Vendor:Other Category:Other
The TF1107 is designed as one kind of AC 100 V line controlled I/O interface module and it includes the optical isolator. Using this module, you can design high reliability and compact system.
Features of the TF1107 are...
Vendor:Other Category:Other
The TF1106 is designed as one kind of AC line controlled I/O interface module and it includes the optical isolator. Using this module, you can design high reliability and compact system.
Features of the TF1106 are:(1)re...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The TF is an ATO style blade fuse rated at 90V, featuring a three part construction with copper contacts for excellent reliability in harsh environment conditions and low voltage drop. Current ratings 4A thru 15A. With s...
Vendor:Other Category:Other
Bookham narrowband filters leverage the proprietary Advanced Energetic Deposition (AED) process to produce the industry's best filter solutions. The AED process features state-of-the-art layer thickness control to pro...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW6575 is designed to be used as an input/output transformer in HDSL applications for use with Brooktree BT8973.
Vendor:Other Category:Other
The 4 wire interface between Subscriber Terminals and the Network Termination has been standardized by CCITT recommendation I.430. It uses a passive bus which provides separate receiver and transmit loops operating at 19...
Vendor:Other Category:Other
TEW6175 is designed and approved for Mitel MT8972 and MT8971B/72B devices.
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW6102 is designed to interface with the Motorola MC145422/26 UDLT (Universal Digital-Loop Transceivers).The MC145422/26 UDLT's are high-speed data transceivers that provide 80-kbps full-duplex data communications over ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The TEW6086 series transformers are designed to interface with the ADSL transceiver unit at the remote terminal end (ATU-R) and with the ADSL transceiver unit at the central office end ( ATU-C).
Vendor:Other Category:Other
TEW6055 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW6055 meets the electrical specifications of ANSI TI.601- 1988 and ...
Vendor:Other Category:Other
TEW6045 is designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface.TEW6045 complies with the requirements of CCITT I.430.It has been designed and approved for the following dev...
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW6018 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network.TEW6018 meet the electrical requirements for theMOTOROLA MC145572 dev...
Vendor:Other Category:Other
TEW5995 is a surface mount transformer,designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface. TEW5995 complies with the requirements of CCITT I.430.
Vendor:Other Category:Other
TEW5921 is designed to be used as a Transmit and Receive transformer in the ISDN primary rate access network with the following devices:
Vendor:Other Category:Other
TEW5915 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications, with the following devices:
Vendor:Other Category:Other
TEW5914 is is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW5791 is designed to be as an input/output transformer in HSDL applications as described in Bellcore TA-NWT-001210.
Vendor:Other Category:Other
TEW5769 is designed to be used as an INPUT/OUTPUT transformer in the ISDN primary rate access network for the following devices:
Vendor:Other Category:Other
TEW5767 is specifically designed to be used as a high voltage isolationtransformer in T1 and CEPT applications.The Longitudinal balance exceeds the requirements of CCITT I.431.The Return Loss exceeds the requirements of ...
Vendor:Other Category:Other
TEW5747 is designed to be used as a receive transformer in the following applications on 75 coaxial lines.` T3/DS3 44.736 MBPS` E3 34.368 MBPS` STS-1 51.84 MBPS
Vendor:Other Category:Other
TEW5746 is designed to be used as a transmit transformer in the following applications on75 W coaxial lines.· T3/DS3 44.736 MBPS· E3 34.368 MBPS· STS-1 51.84MBPS
Vendor:Other Category:Other
Mfg:FTR Pack:INPUT TRANSFORMER D/C:07+ Vendor:Other Category:Other
TEW5720 is designed to be used as a transmit transformer in the ISDN primary rate access network with the following devices: Dallas DS2186 DS2151Q DS2153Q AT&T T7290 PMC-Sierra PM4341 T...
Vendor:Other Category:Other
TEW5719 is designed to be used as a Receive transformer in the ISDN primary rate access network.
Vendor:Other Category:Other
TEW5716 is designed to be used, as a transmit transformer in the ISDN primary rate access network interfacing the Mitel MT89760/60B and MT89790/90B devices.TEW5716-4 is designed for MT89790B when operating from a single ...
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW5694 is designed and approved to be used, as a transmit transformer in CEPT applications with the following devices:
Vendor:Other Category:Other
TEW5660 is a surface mount transformer, designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface. TEW5660 complies with the requirements of CCITT I.430.
Vendor:Other Category:Other
TEW5515 is designed and approved to be used, as a transmit transformer in CEPT applications, 75 coaxial line, with the following devices:
Vendor:Other Category:Other
TEW5514 is designed and approved to be used as a receive transformer in CEPT applications, 75 W coaxial line, with the following devices:
Vendor:Other Category:Other
TEW5613 is specifically designed to be used as a Transmit transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.
Vendor:Other Category:Other
TEW5364 is specifically designed to be used as an isolation/bridging transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits.A shield is provided to improve the...
Vendor:Other Category:Other
TEW5550 is designed to be used as a receive transformer in the following applications on 75 W coaxial lines.
Vendor:Other Category:Other
TEW5549 is designed to be used, as a transmit transformer in the following applications on75 W coaxial lines.
Vendor:Other Category:Other
TEW5532 is specifically designed to match a 120 twisted pair to a 75 coaxial line in the CEPT trunk.
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW5502 is designed and approved to be used as an OUTPUT transformer in T1/CEPT applications with the following devices:Crystal 61535A,61574A 61575, 6158A Level One 304A, 305A Complies with ANSI T1.408 and CCITT I.431 w...
Vendor:Other Category:Other
TEW5498 is designed to comply with the requirements of an input/output transformer in the ISDN S-Bus Interface.TEW5498 complies with the requirements of CCITT I.430 and ANSI T1.605.· Compact size· Wide temperature rangeT...
Vendor:Other Category:Other
TEW5434 is designed to be used as a Receive transformer in the ISDN primary rate access network.TEW5434 is approved for:
Vendor:Other Category:Other
TEW5433 is designed to be used, as a transmit transformer in the ISDN primary rate access network for,Mitel MT89760/60B MT98790/90B TEW5433-4 is designed for, MT89790B when operating from a single 5 ...
Vendor:Other Category:Other
Vendor:Other Category:Other
TEW5413 is designed to interface with Mitel MT8972 and MT8971B/72B DNIC devices.TEW5413 has the following features.
Vendor:Other Category:Other
TEW5389 is designed and approved for the Level One LXT400 Extended Range DDS Transceiver device.
Vendor:Other Category:Other
TEW5376 is designed to be used either as a transmit or as a receive transformer in the ISDN primary rate access network, for the following devices.
Vendor:Other Category:Other
TEW5363-1 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications, with the following devices:
Vendor:Other Category:Other
TEW5362 is is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:
Vendor:Other Category:Other
TEW5337 is a surface mount transformer, designed to comply with the requirements of an input/ output transformer in the ISDN S-Bus Interface.TEW5337 complies with the requirements of CCITT I.430.
Vendor:Other Category:Other
TEW5335 is designed and approved for Mitel MT8972 and MT8971A/72B devices.
Vendor:Other Category:Other
TEW5328 is designed to be used as a Receive Transformer in the ISDN primary rate access network with the following devices:
Vendor:Other Category:Other
TEW5327 is designed to be used as a transmit transformer in the ISDN primary rate access network with the following devices: Dallas DS2186 AT&T T7290 PMC-Sierra PM4341 T1X PM...
Vendor:Other Category:Other
TEW5318 is designed to interface with the subscriber premises (NT) and the 2-wire line side of the central office equipment (LT) in the ISDN system.TEW5318 meets the requirements for the Mitel MT8972 and MT8971B/72B devi...
Vendor:Other Category:Other
TEW5317 is designed and approved to be used as a receive transformer in CEPT applications with the following device:
Vendor:Other Category:Other
TEW5316 is designed and approved to be used as a transmit transformer in CEPT applications with the followingdevices:
Vendor:Other Category:Other
TEW5315 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing the SIEMENS PEB2235 to a 75, 100 or 120 ohm line. When in transmit mode, connect the two primar...
Vendor:Other Category:Other
TEW5314 is designed and approved to be used as a Receive transformer in T1/CEPT applications with the following Crystal devices: CS61535A, CS61574, CS61574A, CS61575 and CS6158A.
Vendor:Other Category:Other
TEW5301 is designed and approved to be used as a transmit transformer in T1/CEPT applications with the following devices:
© 2008-2012 SeekIC.com Corp.All Rights Reserved.